|
From: | bin zan |
Subject: | Re: [Discuss-gnuradio] running OFDM on USRP2 |
Date: | Wed, 27 Jan 2010 15:02:10 -0500 |
Hi,
I have gnuradio 3.2.2 installed on Ubintu 9.10 and I'm using USRP2s
with XCVR2450 daughterboards.
I tried your example but I changed the interpolation to correspond to
the decimation at the receiver:
./benchmark_ofdm_tx.py -f 2.4G -i 256 --fft-length=64
--occupied-tones=32 --cp-length=4And it works fine.
./benchmark_ofdm_rx.py -f 2.4G -d 256 --fft-length=64
--occupied-tones=32 --cp-length=4
When I tested the example I played with tx and rx gains and the
tx-amplitude to find the best setting.
Cheers,
Veljko
2010/1/27 bin zan <address@hidden>:
> _______________________________________________> Hello,
> I was trying to run following OFDM command on USRP2, however, I got a
> bunch of "SSSSStime out" at the receiver side.
>
> ./benchmark_ofdm_tx.py -f 2.4G -i 512 --fft-length=64 --occupied-tones=32
> --cp-length=4
> ./benchmark_ofdm_rx.py -f 2.4G -d 256 --fft-length=64 --occupied-tones=32
> --cp-length=4
>
> I wonder if there is any one successfully running OFDM on USRP2, what are
> the command parameters you are using and if there is any modification in the
> code, can you let me know.
>
> Thanks,
> Bin
>
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
[Prev in Thread] | Current Thread | [Next in Thread] |