[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Problems transmitting a simple IF sample upconver
From: |
Mattias Kjellsson |
Subject: |
Re: [Discuss-gnuradio] Problems transmitting a simple IF sample upconverted on a USRP2 |
Date: |
Wed, 07 Oct 2009 00:36:43 +0200 |
User-agent: |
Thunderbird 2.0.0.23 (X11/20090817) |
Kris Lists wrote:
> <snip>
>
> I then build a basic flow in python from the sample file to a USRP2
> sink setting the center frequency CF to 1.57542G, and a interpolation
> of 20 to convert the 5Msamp/sec to 100Msamp/sec. The waveform
> transmits for the expected 60 sec.
>
Not sure, but as far as I can recall the frequency range of RFX1800 is
from 1600MHz to... Was it 2000 or 2100 MHz?
//Mattias