[Discuss-gnuradio] Re: USRP with USB/IP

[Alberto Trentadue]

On Fri, 2009-06-05 at 12:14 -0700, Firas Abbas wrote:
> Hi,
> 
> --- On Fri, 6/5/09, Patrick Strasser <patrick.
address@hidden> wrote:
> > Hello!
> > 
> > ednet[1] and RaidSonic[2] sell boxes that can forward USB
> > ports over 
via the Linux USB/IP[3] system.
> > 
> > Patrick
> > 
> 
> From the web site the transfer rate of these boxes is 
10/100Mb/s. So theoretically it should transfer a maximum of 12.5MByte/sec 
which is far below the required 32Mbyte/sec 
of USRP1.

Hello Firas.
Just for my understanding:
The 32Mbyte/s requirement is for a full speed - 4 channel USRP 
operation.
But if we suppose a simpler application, e.g. 1 TX/RX channel only, wouldn't 
this fit in the USB/IP?

Thanks 
for your reply.
BR
Alberto




Promozione di Primavera ! Stampa le tue foto nei formati 13x17 e 13x19 a soli 
0,11 euro.

http://photo.tiscali.it