[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Re: Q. USRP2+RFX2400 performances on dynamic range, a
From: |
Yc Park |
Subject: |
[Discuss-gnuradio] Re: Q. USRP2+RFX2400 performances on dynamic range, and decim |
Date: |
Fri, 22 May 2009 04:19:01 +0200 |
Eric Blossom wrote:
> On Thu, May 21, 2009 at 08:23:31AM +0200, Yc Park wrote:
>> The recorded signal showed only about 25dB between the in-band spectrum
>> level(-25dBm/RBW) and the noise floor (-50dBm/RBW) while the original
>> signal shows at least 45dB.
>
> What gain setting are you using?
> Have you tried lowering it?
>
> Eric
The gain was 10dB. With higher gain, the ACPR gets worse with the given
input power.
I'm sorry that I do not know how to upload the captured spectrum, but it
is exactly as I mentioned in the first place: The noise floor is about
-50dBm while the in-band signal is at -25dBm over the 8.8MHz of the
signal bandwidth.
--
Posted via http://www.ruby-forum.com/.