[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] EEPROM warning
From: |
Woody Dickson |
Subject: |
Re: [Discuss-gnuradio] EEPROM warning |
Date: |
Tue, 17 Feb 2009 11:26:21 +0800 |
Hi Jason,
Thanks for your help.
Does it mean I should burn the EEPROM myself?
Where can I get the instruction on how to build the EEPROM?
Since I don't see any EEPROM burning instruction from the gnuradio
installation doc. I just want to confirm the exact steps on that so I
would accidentally destroyed my EEPROM.
Thanks,
Woody
On Mon, Feb 16, 2009 at 11:28 PM, Jason Uher <address@hidden> wrote:
> 2009/2/16 Jason Uher <address@hidden>:
>>> Warning: Treating daughterboard with invalid EEPROM contents as if it
>>> were a "Basic Tx."
>>> Warning: This is almost certainly wrong... Use appropriate
>>> burn-*-eeprom utility.
>>
>>
>> have you tried using the appropriate burn-*-eeprom utility?
>>
>> It should be something like "gnuradio/usrp/host/apps/burn-db-eeprom -f
>> -A -t (your card type)". You can find your card type and the options
>> in the code here:
>> http://www.gnuradio.org/trac/browser/gnuradio/trunk/usrp/host/apps/burn-db-eeprom?rev=6130
>> (burn-db-eeprom -h might work, mine fails)
>>
>> Jason
>>
>
> Ack, that's a very old link, drop the '?rev=6130' from the end
>
Re: [Discuss-gnuradio] EEPROM warning, Matt Ettus, 2009/02/16