Re: [Discuss-gnuradio] some usrp modules are missing

[Eric Blossom]

On Mon, Feb 02, 2009 at 02:18:28PM +0000, feldmaus wrote:
> Hi,
> 
> i compiled the gnuradio software correctly with this options:
> ./configure --enable-gr-wxgui --enable-grc --enable-usrp \
> --enable-gr-usrp --enable-gr-audio-alsa --enable-gnuradio-examples \
> --enable-gnuradio-core --enable-gr-audio-oss
> 
> There are some modules missing, like <usrp_diagnostic>.


> I got only this Modules to work:
> *********************************************************************         
>  
>                                                                  
> The following components were skipped either because you asked not            
>  
>                                                                  
> to build them or they didn't pass configuration checks:                       
>  
>                                                                  
> 
> usrp2-firmware
> 
> These components will not be built.
> 
> 
> *********************************************************************
> The following GNU Radio components have been successfully configured:
> 
> config
> gruel 
> omnithread
> gnuradio-core
> pmt          
> mblock       
> usrp         
> usrp2        
> gr-usrp      
> gr-usrp2     
> gr-msdd6000  
> gr-audio-alsa
> gr-audio-oss 
> gr-atsc      
> gr-cvsd-vocoder
> gr-gpio        
> gr-gsm-fr-vocoder
> gr-pager         
> gr-radar-mono
> gr-radio-astronomy
> gr-trellis
> gr-video-sdl
> gr-wxgui
> gr-sounder
> gr-utils
> gnuradio-examples
> grc
> 
> You my now run the make command to build these components.
> 
> *********************************************************************
> The following components were skipped either because you asked not
> to build them or they didn't pass configuration checks:
> 
> gcell
> gr-gcell
> gr-audio-jack
> gr-audio-osx
> gr-audio-portaudio
> gr-audio-windows
> gr-comedi
> gr-qtgui
> 
> These components will not be built.
> *********************************************************************
> 
> Do you have any idea ?
> 
> Regards Markus


This looks like it's working.  Unless you've got a USRP2 you've got
everthing you need.

gcell and gr-gcell are used only on the Cell Broadband Engine.
You've got gr-audio-alsa, there's no need for the other gr-audio-*

Eric