|
From: | liu jinnan |
Subject: | [Discuss-gnuradio] ofdm benchmark |
Date: | Fri, 16 Jan 2009 10:46:46 +0800 |
Hi everyone,
I want to do some work in OFDM system on usrp.So I tested
benchmark_ofdm_tx.py and benchmark_ofdm_rx.py.
HW:USRP-PKG/XCVR2450/VERT2450 SW:ubuntu Gnuradio: svn trunk First, I run benchmark_ofdm_tx.py on one computer and observe
ofdm spectrum by usrp_fft.py on another computer.
Two usrps are 1 feet away.
./benchmark_ofdm_tx.py �Cf ./ursp_fft.py �Cf
But the spectrum is not flat in transmit bandwidth, one spike always appears around the center frequency. (changing center freq don't work)
When I set the --tx-amplitude 3000, the spike almost have as the same power as other carriers.
When the usrp transmission finished ,only ground noise in spectrum and no obvious high power noise in the center frequency.
Anyone know the problem is?
Second, I run benchmark_ofdm_tx.py on one computer and benchmark_ofdm_rx.py on another computer
./benchmark_ofdm_tx.py �Cf ./benchmark_ofdm_rx.py �Cf
After initialization, sometimes nothing will be printed on the screen at receiver.( As I expect, "ok: right pktno: 1 n_rcvd: 1 n_right:1" or something alike will be printed.) When the transmiter is stoped,"timeout" will be on the receiver's screen.
Third, if I fixed --fft-length 64 --cp-length 16, some --occupied-tones parameters will bring one expcetion .
Exception in thread Tread-1: Traceback(most recent call last) File "/usr/lib/python2.5/threading.py, line 486,in _bootstrap_inner self.run(): File "/usr/lib/python2.5/site-packages/gnuradio/blks2impl/ofdm.py, line 294, in run self.callback(ok,payload) File "./benchmark_ofdm_rx.py",line 168, in line rx_callback(pkton,)=struct.unpack('!H',payload[0:2]) File "/usr/lib/python2.5/struct.py,line 87,in unpack return.o.unpack(s) errror:unpack requuires a string argument of length 2
I check the payload[0:2] value, almost ' ' in that case. Is there something wrong in receiver part?
Jinnan
|
[Prev in Thread] | Current Thread | [Next in Thread] |