[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] RFX400 for FRS -- Newbie
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] RFX400 for FRS -- Newbie |
Date: |
Wed, 5 Sep 2007 12:30:10 -0700 |
User-agent: |
Mutt/1.5.9i |
On Wed, Sep 05, 2007 at 11:37:46AM -0700, TGV wrote:
>
> Thanks for the answer.
>
> I had already figure out there was no c++ driver for the rfx dboard.
>
> Is there any documentation we can use to develop some drivers for the RFX400
> board in C++?
> I was able to select the SMA connector to use and its way (RX or TX) by
> looking in the schematic. But, for they other things like select the
> bandwith and frequency, or simply turn on the card, I didn't find yet. I
> assume that I could find some answer in the Python code, but it is a long
> process.
> So all information will be useful.
>
> Thanks again.
The relevant python code is reasonable small.
See gr-usrp/src/db_flexrf.py
Eric