[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] gr-atsc progress
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] gr-atsc progress |
Date: |
Wed, 25 Apr 2007 08:12:10 -0700 |
User-agent: |
Mutt/1.5.9i |
On Wed, Apr 25, 2007 at 11:02:13AM -0400, Chuck Swiger wrote:
> The 2.x gr-atsc seems to be closer to working, at least the flow control
> (forecast,consume,etc) creates the exact to-the-byte correct quantity of
> output with no loss of sync (since it keys on easy to discern -5/+5), on
> 120MB size output files.
>
> However the *quality* of the output is only about 65 percent correct,
> which is not suprising if you compare the output of a working (0.9)
> equalizer:
>
> http://musicriver.homeunix.com:8737/eq-out_working.jpg
>
> to a non-working all 2.x equalizer:
>
> http://musicriver.homeunix.com:8737/eq-out_non-working.jpg
>
>
> Any hints or wild guesses from the atsc experts on where to look? It
> must be something with the bit_timing_loop or the equalizer but it is
> largely just copied from the 0.9 stuff.
>
> --Chuck
Did you port the "right" bit timing loop?
As I recall, I tried 2 or 3 different approaches. Without checking
the old code, I'm not sure which one I ended up using.
Eric