[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] transmitting two independent Signals

From: anmar
Subject: [Discuss-gnuradio] transmitting two independent Signals
Date: Tue, 20 Feb 2007 15:41:31 +0100

hi all,

we have been searching for a way to transmit two independent signals one
on TxA and the other on TxB.
we have read the Tx_MUX documentation and tried some settings but we
only could send two different frequencies two only 80khz!!! and we
always have had two signals!
what we like to do is is to chose the "two independent real signal" mode
on the AD9862, how can we do that, just change the AD9862.h, or some
different approach? if yes how to load it to the USRP.
reading some of the forum questions, we understand that the gnuradio
have the "Dual channel complex" mode and changing it would give
conflicts with the FPGA and the software.

is there some thing that we're missing or just not understanding.


Wim & anmar

Posted via http://www.ruby-forum.com/.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]