Re: [Discuss-gnuradio] FPGA replacement

[Brian Padalino]

On 2/16/07, Roberto Mastrodonato <address@hidden> wrote:
> Hi all
>
> as the USRP fpga is open, does anybody know if it's possible to replace the
> FPGA module in the board with a new configurable FPGA?
>
> 10x
> Roberto

If you mean a new FPGA configuration - then sure!  Just pick up your
VHDL or Verilog book, and change the logic within the FPGA.

If you mean a different physical FPGA, it might be a bit difficult to
find one that is pin-compatible.  Plus you will have to reflow the
board.

Hope that helps.

Brian