[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] mutiple signals with the usrp
From: |
Matt Ettus |
Subject: |
Re: [Discuss-gnuradio] mutiple signals with the usrp |
Date: |
Tue, 30 Jan 2007 11:42:02 -0800 |
User-agent: |
Thunderbird 1.5.0.9 (X11/20070104) |
Josh Blum wrote:
> Hello,
>
> I am interested in sending and receiving multiple signals (2 or more?)
> with a single USRP.
>
> It seems that to transmit 2 signals to different daughter boards you
> can interleave the signals, set up 2 subdevices, and do a
> self.u.set_mux(0xba98) (i pulled this from the
> fm_tx_2_daughterboards.py example).
yes.
>
> I assume that receiving 2 signals would be very similar, perhaps a
> different hex value for set_mux?
yes, the mux values are different, but should be set automatically.
> What if I choose to transmit (or receive) those signals on 2 different
> subdevices of the same daughter board, is the code the same?
>
> Transmitting and receiving at the same time using one USRP does not
> seem to fit into this model. Is the correct way to create a USRP
> source and sink in the same flow graph? This may or may not be
> obvious, but my initial attempt failed and I was already sore from
> trying to receive 2 signals at once.
See the usrp_nbfm_ppt.py example. It operates full duplex.
Matt