[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Embedded systems with gnuradio
From: |
Lee Patton |
Subject: |
Re: [Discuss-gnuradio] Embedded systems with gnuradio |
Date: |
Thu, 01 Jun 2006 10:34:47 -0400 |
On Thu, 2006-06-01 at 09:37 +0800, Daniel Piccoli wrote:
> ...and GPS (what bandwidth does this require?).
The peak-to-null bandwidth of the C/A signal (on L1=1575 MHz) is about 1
MHz, and the peak-to-null bandwidth of the P/Y signal (on L1 and L2=1227
MHz) is about 10 MHz.
The C/A signal is for civilian use, and can be used directly. The P/Y
signal can also be used by correlating the signals on L1 and L2. This
is much more complicated than using C/A, but you can get better
positioning accuracy.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Discuss-gnuradio] Embedded systems with gnuradio,
Lee Patton <=