[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] DC component and daughter-boards
From: |
Robitaille, Michael |
Subject: |
Re: [Discuss-gnuradio] DC component and daughter-boards |
Date: |
Tue, 8 Nov 2005 13:41:42 -0700 |
In the post:
http://lists.gnu.org/archive/html/discuss-gnuradio/2005-04/msg00303.html
<http://lists.gnu.org/archive/html/discuss-gnuradio/2005-04/msg00303.html>
Matt indicates that "Feed your signal to the + input, and send the reference
voltage
(Vdd/2, 1.65V, available on the board) to the - input. The problem here
is that the ADC expects the signals to be +/- 1V from the reference,
1.65V. Your signal will need to be properly biased."
Is this a +1.65V you feed to the -input (negative)?
Why does the negative input require a positive voltage bias?
Mike
- Re: [Discuss-gnuradio] DC component and daughter-boards,
Robitaille, Michael <=