[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] "Failed to set initial frequency" andSDCC 2.5.0
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] "Failed to set initial frequency" andSDCC 2.5.0 |
Date: |
Thu, 27 Oct 2005 19:21:22 -0700 |
User-agent: |
Mutt/1.5.6i |
On Thu, Oct 27, 2005 at 09:14:18PM -0400, Lee Patton wrote:
> >
> > I'm not sure if the frequency I'm supposed to enter is the carrier I
> > want to receive, the vco freq, or the DDC output freq. So, I tried the
> > above w/ 100.1M, and got the same result.
> >
You specify the carrier you want to receive.
It figures out the vco and ddc freqs from that.
See set_freq in usrp_fft.py for an example. Ignore all the
self.myform stuff, it's all gui related.
Eric
- [Discuss-gnuradio] "Failed to set initial frequency" and SDCC 2.5.0, Lee Patton, 2005/10/27
- Re: [Discuss-gnuradio] "Failed to set initial frequency" and SDCC 2.5.0, Eric Blossom, 2005/10/27
- Re: [Discuss-gnuradio] "Failed to set initial frequency" and SDCC 2.5.0, Lee Patton, 2005/10/27
- RE: [Discuss-gnuradio] "Failed to set initial frequency" andSDCC 2.5.0, Berndt Josef Wulf, 2005/10/27
- RE: [Discuss-gnuradio] "Failed to set initial frequency" andSDCC 2.5.0, Lee Patton, 2005/10/27
- [Discuss-gnuradio] Re: debugging, Eric Blossom, 2005/10/27
- [Discuss-gnuradio] Re: debugging, Lee Patton, 2005/10/28
- [Discuss-gnuradio] Re: debugging, Eric Blossom, 2005/10/28
- Re: [Discuss-gnuradio] "Failed to set initial frequency" andSDCC 2.5.0,
Eric Blossom <=
Re: [Discuss-gnuradio] "Failed to set initial frequency" and SDCC 2.5.0, Stephane Fillod, 2005/10/28