[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Problem using the dbs card
From: |
Matt Ettus |
Subject: |
Re: [Discuss-gnuradio] Problem using the dbs card |
Date: |
Wed, 12 Oct 2005 14:47:57 -0700 |
User-agent: |
Mozilla Thunderbird 1.0.7-1.1.fc4 (X11/20050929) |
Marcus Leech wrote:
> When I first got my DBS_RX card, I plugged it into a low-noise
> amplifier, and tuned it to the
> GPS L1 frequency, with a circular waveguide feedhorn on the front of
> the LNA. As expected
> the GPS L1 carrier appeared in the fft display. Placing a sheet of
> metal in front of the feedhorn
> caused the L1 blip to go away.
>
> Around this time (I got an early DBS_RX card), there was some concern
> about some resistor values in
> the amplifiers used between the MAX2118 and the A/D. Some values
> caused "deafness". Matt had
> published instructions on how to fix the problem yourself--assuming a
> steady hand, and excellent
> eyesight. I think I've seen rotoviruses that were larger than some of
> the components on modern
> hardware :-) :-)
>
> But I never saw the "deafness" problem, so I never bothered to implement
> the "fix".
ALL units (except for the ones Marcus has) have this fix.
Matt