[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] interpolation and output level
From: |
Javs |
Subject: |
Re: [Discuss-gnuradio] interpolation and output level |
Date: |
Fri, 18 Mar 2005 16:52:34 -0800 (PST) |
Hey Eric,
I tried various values for the amplitude and looks
like it works fine anywhere between 10000 and 35000,
giving me ~= 10mV and 35mV respectively. But anywhere
below or beyond its behaving erratic. Is this the
boundary ?
And here is what I get when I boot my usrp and run the
tx_check.py the first time.
address@hidden usrp]$ ./tx_check.py usrp: found usrp rev2
usrp_open_interface: usb_claim_interface: failed conf
0
could not set config 1: Operation not permitted
open_nth_cmd_interface: open_cmd_interface failed
Traceback (most recent call last):
File "./tx_check.py", line 78, in ?
main ()
File "./tx_check.py", line 70, in main
sg = siggen ()
File "./tx_check.py", line 17, in __init__
self._instantiate_blocks ()
File "./tx_check.py", line 53, in
_instantiate_blocks
self.usrp = usrp.sink_c (0, self.interp)
File
"/usr/local/lib/python2.3/site-packages/gnuradio/usrp1.py",
line 692, in sink_c
return _usrp1.sink_c(*args)
RuntimeError: std::runtime_error
---------
Thanks for looking into it.
Javs
--- Eric Blossom <address@hidden> wrote:
> On Fri, Mar 18, 2005 at 02:05:24PM -0800, Javs
> wrote:
> >
> > Hello ppl,
> >
>
> > I understand that the interpolation factor changes
> the amplitudes of
> > the signals. The default usrp_siggen.py works fine
> and I can admire
> > 16mV and 100 K on the scope. But if I use the
> default intrp of 64 in
> > the example usrp_siggen.py and try to change the
> amplitude levels
> > using -a option, the signals still come down. Any
> guesses why ?
>
> What value's are you trying with the -a option?
> Keep them <= 16000.
>
> > Also, When I first boot my USRP and try an
> example, it fails for the
> > first time. For instance, I tried tx_check.py and
> i had a runtime
> > error. However, it works fine the second time. Is
> this because, it
> > takes its time to load firmware into the FX2 and
> the FPGA or am I
> > missing something here ?
>
> What's the error?
>
> Eric
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com