[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Discuss-gnuradio] VRAudioSource question (was Parallel Port Inter
From: |
Joseph DiVerdi |
Subject: |
RE: [Discuss-gnuradio] VRAudioSource question (was Parallel Port Interface) |
Date: |
Mon, 3 Mar 2003 17:03:59 -0700 |
At 3:39 PM -0800 3/3/03, Ettus, Matt wrote:
>> My understanding is that VrAudioSource is not able to handle I&Q input
>> from a sound card. However, some appropriate changes in
>> VrAudioSource.h
>> would solve the problem, adding support for VrComplex oType.
>> Matt, could you confirm?
>
>You need to use GrAudioSource. There will be 2 outputs, one for the left
>channel, one for the right, both in char, short, or int format. You'll need
>to convert to a complex number if that is what you want. I think I have
>some example code at home, and will try to send it out tonight.
>
>You should also use GrAudioSink for the corresponding output. It will
>actually take a VrComplex input.
>
>Matt
Dear Stephane and Matt,
Thanks much for your help. I'll look into GrAudioSource and look forward to the
example code.
Looking to the (near) future, I will be pushing this complex data stream
through a data processing path ending up with the FT (which will then enable
resolution of positive and negative frequencies). I don't see a lot of modules
with Complex in their names. :( I guess this represents an opportunity. :)
Best regards,
Joseph
--
Joseph A. DiVerdi, Ph.D., M.B.A.
http://diverditech.com/ 970.980.5868 (voice)
http://xtrsystems.com/ 970.224.3723 (fax)
PGP Key ID: 0xD50A9E33