================================================================ GNU coreutils 8.29.53-5fb8eb-dirty: ./tests/test-suite.log ================================================================ # TOTAL: 608 # PASS: 367 # SKIP: 165 # XFAIL: 0 # FAIL: 75 # XPASS: 0 # ERROR: 1 .. contents:: :depth: 2 SKIP: tests/tail-2/inotify-race =============================== kill: 12290: No such process inotify-race.sh: skipped test: breakpoint not hit SKIP tests/tail-2/inotify-race.sh (exit status: 77) SKIP: tests/tail-2/inotify-race2 ================================ kill: 22403: No such process inotify-race2.sh: skipped test: breakpoint not hit SKIP tests/tail-2/inotify-race2.sh (exit status: 77) FAIL: tests/misc/invalid-opt ============================ /bin/sh: Can't open ../no-perl FAIL tests/misc/invalid-opt.pl (exit status: 2) SKIP: tests/rm/ext3-perf ======================== ext3-perf.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/rm/ext3-perf.sh (exit status: 77) SKIP: tests/cp/link-heap ======================== link-heap.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/cp/link-heap.sh (exit status: 77) SKIP: tests/cp/no-ctx ===================== ld: cannot find -ldl no-ctx.sh: skipped test: $CC -shared ... failed to build a shared lib SKIP tests/cp/no-ctx.sh (exit status: 77) FAIL: tests/misc/tty-eof ======================== /bin/sh: Can't open ../no-perl FAIL tests/misc/tty-eof.pl (exit status: 2) SKIP: tests/tail-2/inotify-rotate ================================= inotify-rotate.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/tail-2/inotify-rotate.sh (exit status: 77) SKIP: tests/tail-2/inotify-rotate-resources =========================================== inotify-rotate-resources.sh: skipped test: inotify required SKIP tests/tail-2/inotify-rotate-resources.sh (exit status: 77) SKIP: tests/tail-2/inotify-dir-recreate ======================================= inotify-dir-recreate.sh: skipped test: inotify is not supported SKIP tests/tail-2/inotify-dir-recreate.sh (exit status: 77) SKIP: tests/tail-2/inotify-only-regular ======================================= inotify-only-regular.sh: skipped test: inotify support required SKIP tests/tail-2/inotify-only-regular.sh (exit status: 77) SKIP: tests/rm/deep-2 ===================== deep-2.sh: skipped test: configure did not find a usable version of Perl SKIP tests/rm/deep-2.sh (exit status: 77) FAIL: tests/rm/empty-name ========================= /bin/sh: Can't open ../no-perl FAIL tests/rm/empty-name.pl (exit status: 2) FAIL: tests/rm/fail-eperm ========================= /bin/sh: Can't open ../no-perl FAIL tests/rm/fail-eperm.xpl (exit status: 2) SKIP: tests/rm/hash =================== hash.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/rm/hash.sh (exit status: 77) SKIP: tests/rm/r-root ===================== ld: cannot find -ldl r-root.sh: skipped test: $CC -shared ... failed to build a shared lib SKIP tests/rm/r-root.sh (exit status: 77) FAIL: tests/rm/unreadable ========================= /bin/sh: Can't open ../no-perl FAIL tests/rm/unreadable.pl (exit status: 2) SKIP: tests/rm/many-dir-entries-vs-OOM ====================================== many-dir-entries-vs-OOM.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/rm/many-dir-entries-vs-OOM.sh (exit status: 77) SKIP: tests/rm/rm-readdir-fail ============================== ld: cannot find -ldl rm-readdir-fail.sh: skipped test: $CC -shared ... failed to build a shared lib SKIP tests/rm/rm-readdir-fail.sh (exit status: 77) FAIL: tests/fmt/base ==================== /bin/sh: Can't open ../no-perl FAIL tests/fmt/base.pl (exit status: 2) FAIL: tests/misc/ptx ==================== /bin/sh: Can't open ../no-perl FAIL tests/misc/ptx.pl (exit status: 2) FAIL: tests/misc/test ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/test.pl (exit status: 2) FAIL: tests/misc/seq ==================== /bin/sh: Can't open ../no-perl FAIL tests/misc/seq.pl (exit status: 2) SKIP: tests/misc/seq-io-errors ============================== seq-io-errors.sh: skipped test: /dev/full is required SKIP tests/misc/seq-io-errors.sh (exit status: 77) SKIP: tests/misc/seq-long-double ================================ long.c:1:22: fatal error: features.h: No such file or directory #include ^ compilation terminated. seq-long-double.sh: skipped test: this test runs only on systems with glibc and long double != double SKIP tests/misc/seq-long-double.sh (exit status: 77) FAIL: tests/misc/head ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/head.pl (exit status: 2) FAIL: tests/misc/head-elide-tail ================================ /bin/sh: Can't open ../no-perl FAIL tests/misc/head-elide-tail.pl (exit status: 2) SKIP: tests/tail-2/tail-n0f =========================== tail-n0f.sh: skipped test: /proc/7964/status: missing or 'different' SKIP tests/tail-2/tail-n0f.sh (exit status: 77) FAIL: tests/misc/ls-misc ======================== /bin/sh: Can't open ../no-perl FAIL tests/misc/ls-misc.pl (exit status: 2) FAIL: tests/misc/date ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/date.pl (exit status: 2) FAIL: tests/misc/date-next-dow ============================== /bin/sh: Can't open ../no-perl FAIL tests/misc/date-next-dow.pl (exit status: 2) FAIL: tests/misc/xstrtol ======================== /bin/sh: Can't open ../no-perl FAIL tests/misc/xstrtol.pl (exit status: 2) FAIL: tests/misc/od =================== /bin/sh: Can't open ../no-perl FAIL tests/misc/od.pl (exit status: 2) FAIL: tests/misc/mktemp ======================= /bin/sh: Can't open ../no-perl FAIL tests/misc/mktemp.pl (exit status: 2) SKIP: tests/misc/arch ===================== arch: not built arch.sh: skipped test: required program(s) not built SKIP tests/misc/arch.sh (exit status: 77) FAIL: tests/misc/join ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/join.pl (exit status: 2) FAIL: tests/pr/pr-tests ======================= /bin/sh: Can't open ../no-perl FAIL tests/pr/pr-tests.pl (exit status: 2) SKIP: tests/misc/pwd-option =========================== pwd-option.sh: skipped test: cd does not properly update $PWD SKIP tests/misc/pwd-option.sh (exit status: 77) SKIP: tests/misc/coreutils ========================== coreutils: not built coreutils.sh: skipped test: required program(s) not built SKIP tests/misc/coreutils.sh (exit status: 77) FAIL: tests/misc/cut ==================== /bin/sh: Can't open ../no-perl FAIL tests/misc/cut.pl (exit status: 2) SKIP: tests/misc/cut-huge-range =============================== cut-huge-range.sh: skipped test: this shell lacks ulimit support SKIP tests/misc/cut-huge-range.sh (exit status: 77) FAIL: tests/misc/wc =================== /bin/sh: Can't open ../no-perl FAIL tests/misc/wc.pl (exit status: 2) FAIL: tests/misc/wc-files0-from =============================== /bin/sh: Can't open ../no-perl FAIL tests/misc/wc-files0-from.pl (exit status: 2) FAIL: tests/misc/base64 ======================= /bin/sh: Can't open ../no-perl FAIL tests/misc/base64.pl (exit status: 2) FAIL: tests/misc/basename ========================= /bin/sh: Can't open ../no-perl FAIL tests/misc/basename.pl (exit status: 2) FAIL: tests/misc/comm ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/comm.pl (exit status: 2) SKIP: tests/misc/csplit-heap ============================ csplit-heap.sh: skipped test: this shell lacks ulimit support SKIP tests/misc/csplit-heap.sh (exit status: 77) SKIP: tests/misc/csplit-io-err ============================== ld: cannot find -ldl csplit-io-err.sh: skipped test: $CC -shared ... failed to build a shared lib SKIP tests/misc/csplit-io-err.sh (exit status: 77) FAIL: tests/misc/csplit-suppress-matched ======================================== /bin/sh: Can't open ../no-perl FAIL tests/misc/csplit-suppress-matched.pl (exit status: 2) FAIL: tests/misc/date-debug =========================== --- exp2 2018-06-26 01:55:51.000000000 +0200 +++ out2 2018-06-26 01:55:51.000000000 +0200 @@ -4,10 +4,9 @@ date: using specified time as starting value: '02:30:00' date: error: invalid date/time value: date: user provided time: '(Y-M-D) 2006-04-02 02:30:00' -date: normalized time: '(Y-M-D) 2006-04-02 03:30:00' -date: -- +date: normalized time: '(Y-M-D) 2006-04-02 02:30:00' +date: date: possible reasons: -date: non-existing due to daylight-saving time; date: numeric values overflow; date: missing timezone date: invalid date 'TZ="America/Edmonton" 2006-04-02 02:30:00' FAIL tests/misc/date-debug.sh (exit status: 1) FAIL: tests/misc/date-tz ======================== date: invalid date 'TZ="aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa0" 2017' FAIL tests/misc/date-tz.sh (exit status: 1) FAIL: tests/misc/dircolors ========================== /bin/sh: Can't open ../no-perl FAIL tests/misc/dircolors.pl (exit status: 2) FAIL: tests/misc/dirname ======================== /bin/sh: Can't open ../no-perl FAIL tests/misc/dirname.pl (exit status: 2) FAIL: tests/misc/env-S ====================== /bin/sh: Can't open ../no-perl FAIL tests/misc/env-S.pl (exit status: 2) FAIL: tests/misc/env-S-script ============================= hello env: '/home/bruno/coreutils/build/src/printf x%sx\\n A B': No such file or directory env: use -[v]S to pass options in shebang lines env: 'perl': No such file or directory --- exp5 2018-06-26 01:55:52.000000000 +0200 +++ out5 2018-06-26 01:55:52.000000000 +0200 @@ -1 +0,0 @@ -hello env: 'perl': No such file or directory --- exp6 2018-06-26 01:55:52.000000000 +0200 +++ out6 2018-06-26 01:55:52.000000000 +0200 @@ -1 +0,0 @@ -env6 \ No newline at end of file FAIL tests/misc/env-S-script.sh (exit status: 1) FAIL: tests/misc/expand ======================= /bin/sh: Can't open ../no-perl FAIL tests/misc/expand.pl (exit status: 2) FAIL: tests/misc/expr ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/expr.pl (exit status: 2) FAIL: tests/misc/expr-multibyte =============================== /bin/sh: Can't open ../no-perl FAIL tests/misc/expr-multibyte.pl (exit status: 2) FAIL: tests/misc/factor ======================= /bin/sh: Can't open ../no-perl FAIL tests/misc/factor.pl (exit status: 2) FAIL: tests/misc/fold ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/fold.pl (exit status: 2) SKIP: tests/misc/head-c ======================= head-c.sh: skipped test: this shell lacks ulimit support SKIP tests/misc/head-c.sh (exit status: 77) SKIP: tests/misc/head-write-error ================================= head-write-error.sh: skipped test: /dev/full is required SKIP tests/misc/head-write-error.sh (exit status: 77) FAIL: tests/misc/md5sum ======================= /bin/sh: Can't open ../no-perl FAIL tests/misc/md5sum.pl (exit status: 2) FAIL: tests/misc/md5sum-newline =============================== /bin/sh: Can't open ../no-perl FAIL tests/misc/md5sum-newline.pl (exit status: 2) FAIL: tests/misc/numfmt ======================= /bin/sh: Can't open ../no-perl FAIL tests/misc/numfmt.pl (exit status: 2) FAIL: tests/misc/paste ====================== /bin/sh: Can't open ../no-perl FAIL tests/misc/paste.pl (exit status: 2) FAIL: tests/misc/printf-cov =========================== /bin/sh: Can't open ../no-perl FAIL tests/misc/printf-cov.pl (exit status: 2) SKIP: tests/misc/printf-surprise ================================ printf-surprise.sh: skipped test: this shell lacks ulimit support SKIP tests/misc/printf-surprise.sh (exit status: 77) SKIP: tests/misc/pwd-long ========================= pwd-long.sh: skipped test: configure did not find a usable version of Perl SKIP tests/misc/pwd-long.sh (exit status: 77) FAIL: tests/misc/sha1sum ======================== /bin/sh: Can't open ../no-perl FAIL tests/misc/sha1sum.pl (exit status: 2) FAIL: tests/misc/sha1sum-vec ============================ /bin/sh: Can't open ../no-perl FAIL tests/misc/sha1sum-vec.pl (exit status: 2) FAIL: tests/misc/sha224sum ========================== /bin/sh: Can't open ../no-perl FAIL tests/misc/sha224sum.pl (exit status: 2) FAIL: tests/misc/sha256sum ========================== /bin/sh: Can't open ../no-perl FAIL tests/misc/sha256sum.pl (exit status: 2) FAIL: tests/misc/sha384sum ========================== /bin/sh: Can't open ../no-perl FAIL tests/misc/sha384sum.pl (exit status: 2) FAIL: tests/misc/sha512sum ========================== /bin/sh: Can't open ../no-perl FAIL tests/misc/sha512sum.pl (exit status: 2) SKIP: tests/misc/shuf-reservoir =============================== shuf-reservoir.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/misc/shuf-reservoir.sh (exit status: 77) FAIL: tests/misc/sort ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/sort.pl (exit status: 2) SKIP: tests/misc/sort-benchmark-random ====================================== sort-benchmark-random.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/misc/sort-benchmark-random.sh (exit status: 77) SKIP: tests/misc/sort-compress-hang =================================== sort-compress-hang.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/misc/sort-compress-hang.sh (exit status: 77) SKIP: tests/misc/sort-compress-proc =================================== sort-compress-proc.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/misc/sort-compress-proc.sh (exit status: 77) FAIL: tests/misc/sort-files0-from ================================= /bin/sh: Can't open ../no-perl FAIL tests/misc/sort-files0-from.pl (exit status: 2) SKIP: tests/misc/sort-h-thousands-sep ===================================== sort-h-thousands-sep.sh: skipped test: The Swedish locale with blank thousands separator is unavailable. SKIP tests/misc/sort-h-thousands-sep.sh (exit status: 77) FAIL: tests/misc/sort-merge =========================== /bin/sh: Can't open ../no-perl FAIL tests/misc/sort-merge.pl (exit status: 2) SKIP: tests/misc/sort-month =========================== sort-month.sh: skipped test: The locale utility is not present SKIP tests/misc/sort-month.sh (exit status: 77) SKIP: tests/misc/sort-spinlock-abuse ==================================== sort-spinlock-abuse.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/misc/sort-spinlock-abuse.sh (exit status: 77) SKIP: tests/misc/sort-stale-thread-mem ====================================== sort-stale-thread-mem.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/misc/sort-stale-thread-mem.sh (exit status: 77) SKIP: tests/misc/sort-u-FMR =========================== valgrind: not found sort-u-FMR.sh: skipped test: requires a working valgrind SKIP tests/misc/sort-u-FMR.sh (exit status: 77) SKIP: tests/split/line-bytes ============================ line-bytes.sh: skipped test: this shell lacks ulimit support SKIP tests/split/line-bytes.sh (exit status: 77) FAIL: tests/misc/stat-printf ============================ /bin/sh: Can't open ../no-perl FAIL tests/misc/stat-printf.pl (exit status: 2) SKIP: tests/misc/stty ===================== strace: not found stty.sh: skipped test: no strace program SKIP tests/misc/stty.sh (exit status: 77) SKIP: tests/misc/stty-pairs =========================== stty-pairs.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/misc/stty-pairs.sh (exit status: 77) FAIL: tests/misc/sum ==================== /bin/sh: Can't open ../no-perl FAIL tests/misc/sum.pl (exit status: 2) SKIP: tests/misc/sum-sysv ========================= sum-sysv.sh: skipped test: configure did not find a usable version of Perl SKIP tests/misc/sum-sysv.sh (exit status: 77) FAIL: tests/misc/tac ==================== /bin/sh: Can't open ../no-perl FAIL tests/misc/tac.pl (exit status: 2) SKIP: tests/misc/tac-continue ============================= tac-continue.sh: skipped test: FULL_PARTITION_TMPDIR not defined SKIP tests/misc/tac-continue.sh (exit status: 77) FAIL: tests/misc/tac-2-nonseekable ================================== FAIL tests/misc/tac-2-nonseekable.sh (exit status: 1) FAIL: tests/misc/tail ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/tail.pl (exit status: 2) FAIL: tests/misc/test-diag ========================== /bin/sh: Can't open ../no-perl FAIL tests/misc/test-diag.pl (exit status: 2) FAIL: tests/misc/timeout-blocked ================================ /bin/sh: Can't open ../no-perl FAIL tests/misc/timeout-blocked.pl (exit status: 2) SKIP: tests/misc/timeout-group ============================== kill: illegal process id: -- timeout-group.sh: skipped test: requires kill with group signalling support SKIP tests/misc/timeout-group.sh (exit status: 77) FAIL: tests/misc/tr =================== /bin/sh: Can't open ../no-perl FAIL tests/misc/tr.pl (exit status: 2) FAIL: tests/misc/tsort ====================== /bin/sh: Can't open ../no-perl FAIL tests/misc/tsort.pl (exit status: 2) FAIL: tests/misc/tty ==================== /dev/console not a tty /dev/console tty: extra operand 'a' Try 'tty --help' for more information. tty: extra operand 'a' Try 'tty --help' for more information. FAIL tests/misc/tty.sh (exit status: 1) FAIL: tests/misc/unexpand ========================= /bin/sh: Can't open ../no-perl FAIL tests/misc/unexpand.pl (exit status: 2) FAIL: tests/misc/uniq ===================== /bin/sh: Can't open ../no-perl FAIL tests/misc/uniq.pl (exit status: 2) SKIP: tests/misc/xattr ====================== cp: cannot preserve extended attributes, cp is built without xattr support xattr.sh: skipped test: coreutils built without xattr support SKIP tests/misc/xattr.sh (exit status: 77) FAIL: tests/tail-2/retry ======================== tail: warning: --retry ignored; --retry is useful only when following tail: warning: --retry ignored; --retry is useful only when following [1] Terminated timeout 10 tail ... tail: cannot open 'missing' for reading: No such file or directory tail: 'missing' has appeared; following new file X [1] Terminated timeout 10 tail ... tail: warning: --retry only effective for the initial open tail: cannot open 'missing' for reading: No such file or directory tail: 'missing' has appeared; following new file X1 tail: missing: file truncated X tail: warning: --retry only effective for the initial open tail: cannot open 'missing' for reading: No such file or directory tail: 'missing' has been replaced with an untailable file; giving up on this name tail: no files remaining tail: warning: --retry only effective for the initial open tail: cannot open 'missing' for reading: No such file or directory tail: 'missing' has been replaced with an untailable file; giving up on this name tail: no files remaining tail: cannot open 'missing' for reading: No such file or directory X [1] Terminated tail ${mode} ${f... tail: cannot open 'missing' for reading: No such file or directory tail: no files remaining tail: cannot open 'missing' for reading: No such file or directory tail: no files remaining [1] Terminated timeout 10 tail ... tail: cannot open 'missing' for reading: No such file or directory tail: 'missing' has appeared; following new file X [1] Terminated timeout 10 tail ... tail: warning: --retry only effective for the initial open tail: cannot open 'missing' for reading: No such file or directory tail: 'missing' has appeared; following new file X1 tail: missing: file truncated X tail: warning: --retry only effective for the initial open tail: cannot open 'missing' for reading: No such file or directory tail: 'missing' has been replaced with an untailable file; giving up on this name tail: no files remaining tail: warning: --retry only effective for the initial open tail: cannot open 'missing' for reading: No such file or directory tail: 'missing' has been replaced with an untailable file; giving up on this name tail: no files remaining tail: cannot open 'missing' for reading: No such file or directory X [1] Terminated tail ${mode} ${f... tail: cannot open 'missing' for reading: No such file or directory tail: no files remaining tail: cannot open 'missing' for reading: No such file or directory tail: no files remaining FAIL tests/tail-2/retry.sh (exit status: 1) SKIP: tests/cp/acl ================== getfacl: not found acl.sh: skipped test: This test requires getfacl and setfacl. SKIP tests/cp/acl.sh (exit status: 77) FAIL: tests/cp/existing-perm-race ================================= getfacl: not found FAIL tests/cp/existing-perm-race.sh (exit status: 1) SKIP: tests/cp/fiemap-extents ============================= python: not found fiemap_capable_: python missing: assuming not fiemap capable fiemap-extents.sh: skipped test: this file system lacks FIEMAP support SKIP tests/cp/fiemap-extents.sh (exit status: 77) SKIP: tests/cp/fiemap-FMR ========================= valgrind: not found fiemap-FMR.sh: skipped test: requires a working valgrind SKIP tests/cp/fiemap-FMR.sh (exit status: 77) SKIP: tests/cp/fiemap-perf ========================== python: not found fiemap_capable_: python missing: assuming not fiemap capable fiemap-perf.sh: skipped test: this file system lacks FIEMAP support SKIP tests/cp/fiemap-perf.sh (exit status: 77) SKIP: tests/cp/fiemap-2 ======================= python: not found fiemap_capable_: python missing: assuming not fiemap capable fiemap-2.sh: skipped test: this file system lacks FIEMAP support SKIP tests/cp/fiemap-2.sh (exit status: 77) FAIL: tests/cp/file-perm-race ============================= FAIL tests/cp/file-perm-race.sh (exit status: 1) SKIP: tests/cp/nfs-removal-race =============================== ld: cannot find -ldl nfs-removal-race.sh: skipped test: $CC -shared ... failed to build a shared lib SKIP tests/cp/nfs-removal-race.sh (exit status: 77) FAIL: tests/cp/parent-perm-race =============================== FAIL tests/cp/parent-perm-race.sh (exit status: 1) SKIP: tests/cp/perm =================== perm.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/cp/perm.sh (exit status: 77) SKIP: tests/cp/proc-short-read ============================== proc-short-read.sh: skipped test: your system lacks /proc/kallsyms SKIP tests/cp/proc-short-read.sh (exit status: 77) SKIP: tests/cp/reflink-auto =========================== reflink-auto.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/cp/reflink-auto.sh (exit status: 77) SKIP: tests/df/no-mtab-status ============================= ld: cannot find -ldl no-mtab-status.sh: skipped test: $CC -shared ... failed to build a shared lib SKIP tests/df/no-mtab-status.sh (exit status: 77) SKIP: tests/df/skip-duplicates ============================== ld: cannot find -ldl skip-duplicates.sh: skipped test: $CC -shared ... failed to build a shared lib SKIP tests/df/skip-duplicates.sh (exit status: 77) SKIP: tests/df/skip-rootfs ========================== Filesystem 1K-blocks Used Available Use% Mounted on /dev/wd0a 6302270 3234760 2752398 55% / ptyfs 1 1 0 100% /dev/pts tmpfs 262028 0 262028 0% /var/shm skip-rootfs.sh: skipped test: no rootfs in mtab SKIP tests/df/skip-rootfs.sh (exit status: 77) SKIP: tests/dd/no-allocate ========================== no-allocate.sh: skipped test: this shell lacks ulimit support SKIP tests/dd/no-allocate.sh (exit status: 77) SKIP: tests/dd/nocache_eof ========================== strace: not found nocache_eof.sh: skipped test: no strace program SKIP tests/dd/nocache_eof.sh (exit status: 77) FAIL: tests/dd/skip-seek ======================== /bin/sh: Can't open ../no-perl FAIL tests/dd/skip-seek.pl (exit status: 2) FAIL: tests/dd/unblock ====================== /bin/sh: Can't open ../no-perl FAIL tests/dd/unblock.pl (exit status: 2) SKIP: tests/df/total-verify =========================== total-verify.sh: skipped test: configure did not find a usable version of Perl SKIP tests/df/total-verify.sh (exit status: 77) SKIP: tests/du/2g ================= 2g.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/du/2g.sh (exit status: 77) SKIP: tests/du/fd-leak ====================== fd-leak.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/du/fd-leak.sh (exit status: 77) FAIL: tests/du/files0-from ========================== /bin/sh: Can't open ../no-perl FAIL tests/du/files0-from.pl (exit status: 2) SKIP: tests/du/files0-from-dir ============================== files0-from-dir.sh: skipped test: cat dir/ succeeds SKIP tests/du/files0-from-dir.sh (exit status: 77) ERROR: tests/du/long-from-unreadable ==================================== perl: not found WARNING: 'perl' is missing on your system. You might have modified some files without having the proper tools for further handling them. Check the 'README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package contains this missing 'perl' program. long-from-unreadable.sh: set-up failure: ERROR tests/du/long-from-unreadable.sh (exit status: 99) SKIP: tests/du/move-dir-while-traversing ======================================== python: not found move-dir-while-traversing.sh: skipped test: python inotify package not installed SKIP tests/du/move-dir-while-traversing.sh (exit status: 77) SKIP: tests/du/one-file-system ============================== one-file-system.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/du/one-file-system.sh (exit status: 77) SKIP: tests/id/gnu-zero-uids ============================ gnu-zero-uids.sh: skipped test: not running on GNU/Hurd SKIP tests/id/gnu-zero-uids.sh (exit status: 77) SKIP: tests/id/no-context ========================= grep: /proc/filesystems: No such file or directory no-context.sh: skipped test: this system lacks SELinux support SKIP tests/id/no-context.sh (exit status: 77) SKIP: tests/id/context ====================== grep: /proc/filesystems: No such file or directory context.sh: skipped test: this system lacks SELinux support SKIP tests/id/context.sh (exit status: 77) SKIP: tests/id/smack ==================== grep: /proc/filesystems: No such file or directory smack.sh: skipped test: this system lacks SMACK support SKIP tests/id/smack.sh (exit status: 77) SKIP: tests/install/install-C-selinux ===================================== grep: /proc/filesystems: No such file or directory install-C-selinux.sh: skipped test: this system lacks SELinux support SKIP tests/install/install-C-selinux.sh (exit status: 77) SKIP: tests/install/install-Z-selinux ===================================== grep: /proc/filesystems: No such file or directory install-Z-selinux.sh: skipped test: this system lacks SELinux support SKIP tests/install/install-Z-selinux.sh (exit status: 77) SKIP: tests/ls/getxattr-speedup =============================== ld: cannot find -ldl getxattr-speedup.sh: skipped test: $CC -shared ... failed to build a shared lib SKIP tests/ls/getxattr-speedup.sh (exit status: 77) SKIP: tests/ls/no-cap ===================== strace: not found no-cap.sh: skipped test: no strace program SKIP tests/ls/no-cap.sh (exit status: 77) SKIP: tests/ls/root-rel-symlink-color ===================================== root-rel-symlink-color.sh: skipped test: no relative symlink in / SKIP tests/ls/root-rel-symlink-color.sh (exit status: 77) SKIP: tests/ls/slink-acl ======================== setfacl: not found slink-acl.sh: skipped test: setfacl does not work on the current file system SKIP tests/ls/slink-acl.sh (exit status: 77) SKIP: tests/ls/stat-free-color ============================== strace: not found stat-free-color.sh: skipped test: no strace program SKIP tests/ls/stat-free-color.sh (exit status: 77) SKIP: tests/ls/stat-free-symlinks ================================= strace: not found stat-free-symlinks.sh: skipped test: no strace program SKIP tests/ls/stat-free-symlinks.sh (exit status: 77) SKIP: tests/mkdir/p-acl ======================= setfacl: not found p-acl.sh: skipped test: setfacl does not work on the current file system SKIP tests/mkdir/p-acl.sh (exit status: 77) SKIP: tests/mkdir/selinux ========================= grep: /proc/filesystems: No such file or directory selinux.sh: skipped test: this system lacks SELinux support SKIP tests/mkdir/selinux.sh (exit status: 77) SKIP: tests/mkdir/restorecon ============================ grep: /proc/filesystems: No such file or directory restorecon.sh: skipped test: this system lacks SELinux support SKIP tests/mkdir/restorecon.sh (exit status: 77) SKIP: tests/mkdir/smack-no-root =============================== grep: /proc/filesystems: No such file or directory smack-no-root.sh: skipped test: this system lacks SMACK support SKIP tests/mkdir/smack-no-root.sh (exit status: 77) SKIP: tests/mv/acl ================== getfacl: not found acl.sh: skipped test: This test requires getfacl and setfacl. SKIP tests/mv/acl.sh (exit status: 77) SKIP: tests/mv/atomic ===================== strace: not found atomic.sh: skipped test: no strace program SKIP tests/mv/atomic.sh (exit status: 77) SKIP: tests/mv/atomic2 ====================== strace: not found atomic2.sh: skipped test: no strace program SKIP tests/mv/atomic2.sh (exit status: 77) SKIP: tests/mv/backup-is-src ============================ backup-is-src.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/backup-is-src.sh (exit status: 77) SKIP: tests/mv/hard-link-1 ========================== hard-link-1.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/hard-link-1.sh (exit status: 77) FAIL: tests/mv/i-1 ================== /bin/sh: Can't open ../no-perl FAIL tests/mv/i-1.pl (exit status: 2) SKIP: tests/mv/i-3 ================== NetBSD i-3.sh: skipped test: known spurious failure on *BSD SKIP tests/mv/i-3.sh (exit status: 77) SKIP: tests/mv/into-self-2 ========================== into-self-2.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/into-self-2.sh (exit status: 77) SKIP: tests/mv/leak-fd ====================== leak-fd.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/leak-fd.sh (exit status: 77) SKIP: tests/mv/mv-special-1 =========================== mv-special-1.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/mv-special-1.sh (exit status: 77) SKIP: tests/mv/part-fail ======================== part-fail.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. chmod: cannot access '': No such file or directory SKIP tests/mv/part-fail.sh (exit status: 77) SKIP: tests/mv/part-hardlink ============================ part-hardlink.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/part-hardlink.sh (exit status: 77) SKIP: tests/mv/part-rename ========================== part-rename.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/part-rename.sh (exit status: 77) SKIP: tests/mv/part-symlink =========================== part-symlink.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/part-symlink.sh (exit status: 77) SKIP: tests/mv/partition-perm ============================= partition-perm.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/partition-perm.sh (exit status: 77) SKIP: tests/mv/symlink-onto-hardlink-to-self ============================================ symlink-onto-hardlink-to-self.sh: skipped test: your kernel or file system cannot create a hard link to a symlink SKIP tests/mv/symlink-onto-hardlink-to-self.sh (exit status: 77) SKIP: tests/mv/to-symlink ========================= to-symlink.sh: skipped test: requires a writable directory on a different disk partition, and I couldn't find one. I tried these: /tmp /tmp /dev/shm /var/tmp /usr/tmp /home/bruno Set your environment variable CANDIDATE_TMP_DIRS to make this test use a different list. SKIP tests/mv/to-symlink.sh (exit status: 77) SKIP: tests/tail-2/big-4gb ========================== big-4gb.sh: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP tests/tail-2/big-4gb.sh (exit status: 77) FAIL: tests/tail-2/follow-stdin =============================== line [1] Terminated tail ${mode} -f ... line [1] Terminated tail ${mode} -f ... --- exp 2018-06-26 20:47:35.000000000 +0200 +++ err 2018-06-26 20:47:35.000000000 +0200 @@ -1,4 +0,0 @@ -tail: cannot fstat 'standard input' -tail: error reading 'standard input' -tail: no files remaining -tail: - tail: warning: following standard input indefinitely is ineffective [1] Terminated tail -f - /dev/n... FAIL tests/tail-2/follow-stdin.sh (exit status: 1) FAIL: tests/tail-2/pipe-f ========================= tail: cannot open 'missing' for reading: No such file or directory tail: no files remaining tail: cannot open 'missing' for reading: No such file or directory tail: no files remaining FAIL tests/tail-2/pipe-f.sh (exit status: 1) FAIL: tests/tail-2/pipe-f2 ========================== --- exp 2018-06-26 20:47:56.000000000 +0200 +++ out 2018-06-26 20:47:56.000000000 +0200 @@ -1 +0,0 @@ -1 kill: 5600: No such process FAIL tests/tail-2/pipe-f2.sh (exit status: 1) FAIL: tests/touch/not-owner =========================== --- exp 2018-06-26 20:48:09.000000000 +0200 +++ out 2018-06-26 20:48:09.000000000 +0200 @@ -1 +1 @@ -touch: setting times of '/': Read-only file system +touch: cannot touch '/': File exists FAIL tests/touch/not-owner.sh (exit status: 1) SKIP: tests/chown/basic ======================= basic.sh: skipped test: must be run as root SKIP tests/chown/basic.sh (exit status: 77) SKIP: tests/cp/cp-a-selinux =========================== cp-a-selinux.sh: skipped test: must be run as root SKIP tests/cp/cp-a-selinux.sh (exit status: 77) SKIP: tests/cp/preserve-gid =========================== preserve-gid.sh: skipped test: must be run as root SKIP tests/cp/preserve-gid.sh (exit status: 77) SKIP: tests/cp/special-bits =========================== special-bits.sh: skipped test: must be run as root SKIP tests/cp/special-bits.sh (exit status: 77) SKIP: tests/cp/cp-mv-enotsup-xattr ================================== cp-mv-enotsup-xattr.sh: skipped test: must be run as root SKIP tests/cp/cp-mv-enotsup-xattr.sh (exit status: 77) SKIP: tests/cp/capability ========================= capability.sh: skipped test: must be run as root SKIP tests/cp/capability.sh (exit status: 77) SKIP: tests/cp/sparse-fiemap ============================ sparse-fiemap.sh: skipped test: configure did not find a usable version of Perl SKIP tests/cp/sparse-fiemap.sh (exit status: 77) SKIP: tests/cp/cross-dev-symlink ================================ cross-dev-symlink.sh: skipped test: must be run as root SKIP tests/cp/cross-dev-symlink.sh (exit status: 77) SKIP: tests/dd/skip-seek-past-dev ================================= skip-seek-past-dev.sh: skipped test: must be run as root SKIP tests/dd/skip-seek-past-dev.sh (exit status: 77) SKIP: tests/df/problematic-chars ================================ problematic-chars.sh: skipped test: must be run as root SKIP tests/df/problematic-chars.sh (exit status: 77) SKIP: tests/df/over-mount-device ================================ over-mount-device.sh: skipped test: must be run as root SKIP tests/df/over-mount-device.sh (exit status: 77) SKIP: tests/du/bind-mount-dir-cycle =================================== bind-mount-dir-cycle.sh: skipped test: must be run as root SKIP tests/du/bind-mount-dir-cycle.sh (exit status: 77) SKIP: tests/du/bind-mount-dir-cycle-v2 ====================================== bind-mount-dir-cycle-v2.sh: skipped test: must be run as root SKIP tests/du/bind-mount-dir-cycle-v2.sh (exit status: 77) SKIP: tests/id/setgid ===================== setgid.sh: skipped test: must be run as root SKIP tests/id/setgid.sh (exit status: 77) SKIP: tests/install/install-C-root ================================== install-C-root.sh: skipped test: must be run as root SKIP tests/install/install-C-root.sh (exit status: 77) SKIP: tests/ls/capability ========================= capability.sh: skipped test: must be run as root SKIP tests/ls/capability.sh (exit status: 77) SKIP: tests/ls/nameless-uid =========================== nameless-uid.sh: skipped test: must be run as root SKIP tests/ls/nameless-uid.sh (exit status: 77) SKIP: tests/misc/chcon ====================== chcon.sh: skipped test: must be run as root SKIP tests/misc/chcon.sh (exit status: 77) SKIP: tests/misc/chroot-credentials =================================== chroot-credentials.sh: skipped test: must be run as root SKIP tests/misc/chroot-credentials.sh (exit status: 77) SKIP: tests/misc/selinux ======================== selinux.sh: skipped test: must be run as root SKIP tests/misc/selinux.sh (exit status: 77) SKIP: tests/misc/truncate-owned-by-other ======================================== truncate-owned-by-other.sh: skipped test: must be run as root SKIP tests/misc/truncate-owned-by-other.sh (exit status: 77) SKIP: tests/mkdir/writable-under-readonly ========================================= writable-under-readonly.sh: skipped test: must be run as root SKIP tests/mkdir/writable-under-readonly.sh (exit status: 77) SKIP: tests/mkdir/smack-root ============================ grep: /proc/filesystems: No such file or directory smack-root.sh: skipped test: this system lacks SMACK support SKIP tests/mkdir/smack-root.sh (exit status: 77) SKIP: tests/mv/hardlink-case ============================ hardlink-case.sh: skipped test: must be run as root SKIP tests/mv/hardlink-case.sh (exit status: 77) SKIP: tests/mv/sticky-to-xpart ============================== sticky-to-xpart.sh: skipped test: must be run as root SKIP tests/mv/sticky-to-xpart.sh (exit status: 77) SKIP: tests/rm/fail-2eperm ========================== fail-2eperm.sh: skipped test: must be run as root SKIP tests/rm/fail-2eperm.sh (exit status: 77) SKIP: tests/rm/no-give-up ========================= no-give-up.sh: skipped test: must be run as root SKIP tests/rm/no-give-up.sh (exit status: 77) SKIP: tests/rm/one-file-system ============================== one-file-system.sh: skipped test: must be run as root SKIP tests/rm/one-file-system.sh (exit status: 77) SKIP: tests/rm/read-only ======================== read-only.sh: skipped test: must be run as root SKIP tests/rm/read-only.sh (exit status: 77) SKIP: tests/tail-2/append-only ============================== append-only.sh: skipped test: must be run as root SKIP tests/tail-2/append-only.sh (exit status: 77) SKIP: tests/tail-2/end-of-device ================================ end-of-device.sh: skipped test: must be run as root SKIP tests/tail-2/end-of-device.sh (exit status: 77) SKIP: tests/touch/now-owned-by-other ==================================== now-owned-by-other.sh: skipped test: must be run as root SKIP tests/touch/now-owned-by-other.sh (exit status: 77) SKIP: tests/factor/t00 ====================== t00.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t00.sh (exit status: 77) SKIP: tests/factor/t01 ====================== t01.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t01.sh (exit status: 77) SKIP: tests/factor/t02 ====================== t02.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t02.sh (exit status: 77) SKIP: tests/factor/t03 ====================== t03.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t03.sh (exit status: 77) SKIP: tests/factor/t04 ====================== t04.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t04.sh (exit status: 77) SKIP: tests/factor/t05 ====================== t05.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t05.sh (exit status: 77) SKIP: tests/factor/t06 ====================== t06.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t06.sh (exit status: 77) SKIP: tests/factor/t07 ====================== t07.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t07.sh (exit status: 77) SKIP: tests/factor/t08 ====================== t08.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t08.sh (exit status: 77) SKIP: tests/factor/t09 ====================== t09.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t09.sh (exit status: 77) SKIP: tests/factor/t10 ====================== t10.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t10.sh (exit status: 77) SKIP: tests/factor/t11 ====================== t11.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t11.sh (exit status: 77) SKIP: tests/factor/t12 ====================== t12.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t12.sh (exit status: 77) SKIP: tests/factor/t13 ====================== t13.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t13.sh (exit status: 77) SKIP: tests/factor/t14 ====================== t14.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t14.sh (exit status: 77) SKIP: tests/factor/t15 ====================== t15.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t15.sh (exit status: 77) SKIP: tests/factor/t16 ====================== t16.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t16.sh (exit status: 77) SKIP: tests/factor/t17 ====================== t17.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t17.sh (exit status: 77) SKIP: tests/factor/t18 ====================== t18.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t18.sh (exit status: 77) SKIP: tests/factor/t19 ====================== t19.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t19.sh (exit status: 77) SKIP: tests/factor/t20 ====================== t20.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t20.sh (exit status: 77) SKIP: tests/factor/t21 ====================== t21.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t21.sh (exit status: 77) SKIP: tests/factor/t22 ====================== t22.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t22.sh (exit status: 77) SKIP: tests/factor/t23 ====================== t23.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t23.sh (exit status: 77) SKIP: tests/factor/t24 ====================== t24.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t24.sh (exit status: 77) SKIP: tests/factor/t25 ====================== t25.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t25.sh (exit status: 77) SKIP: tests/factor/t26 ====================== t26.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t26.sh (exit status: 77) SKIP: tests/factor/t27 ====================== t27.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t27.sh (exit status: 77) SKIP: tests/factor/t28 ====================== t28.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t28.sh (exit status: 77) SKIP: tests/factor/t29 ====================== t29.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t29.sh (exit status: 77) SKIP: tests/factor/t30 ====================== t30.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t30.sh (exit status: 77) SKIP: tests/factor/t31 ====================== t31.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t31.sh (exit status: 77) SKIP: tests/factor/t32 ====================== t32.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t32.sh (exit status: 77) SKIP: tests/factor/t33 ====================== t33.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t33.sh (exit status: 77) SKIP: tests/factor/t34 ====================== t34.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t34.sh (exit status: 77) SKIP: tests/factor/t35 ====================== t35.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t35.sh (exit status: 77) SKIP: tests/factor/t36 ====================== t36.sh: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP tests/factor/t36.sh (exit status: 77)