====================================================== GNU coreutils 8.13.29-43a9: tests/test-suite.log ====================================================== 8 of 358 tests failed. (103 tests were not run). .. contents:: :depth: 2 FAIL: misc/help-version (exit: 1) ================================= env: [: No such file or directory help-version: failed test: --version-$VERSION mismatch SKIP: tail-2/inotify-race (exit: 77) ==================================== inotify-race: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: rm/ext3-perf (exit: 77) ============================= ext3-perf: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: cp/link-heap (exit: 77) ============================= link-heap: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP: tail-2/inotify-rotate (exit: 77) ====================================== inotify-rotate: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP: chgrp/basic (exit: 77) ============================ basic: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running `id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP: rm/isatty (exit: 77) ========================== isatty: skipped test: there is no /dev/stdin file SKIP: tail-2/assert (exit: 77) ============================== assert: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: rm/hash (exit: 77) ======================== hash: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive FAIL: tail-2/infloop-1 (exit: 1) ================================ sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s sleep 0.1s SKIP: rm/inaccessible (exit: 77) ================================ inaccessible: skipped test: this system lacks openat support SKIP: rm/many-dir-entries-vs-OOM (exit: 77) =========================================== many-dir-entries-vs-OOM: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP: chgrp/default-no-deref (exit: 77) ======================================= default-no-deref: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running `id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP: chgrp/deref (exit: 77) ============================ deref: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running `id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP: chgrp/no-x (exit: 77) =========================== no-x: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running `id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP: chgrp/posix-H (exit: 77) ============================== posix-H: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running `id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP: chgrp/recurse (exit: 77) ============================== recurse: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running `id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP: misc/seq-long-double (exit: 77) ===================================== "long.c", line 1.10: 1506-296 (S) #include file not found. "long.c", line 5.1: 1506-046 (S) Syntax error. seq-long-double: skipped test: this test runs only on systems with glibc and long double != double SKIP: tail-2/tail-n0f (exit: 77) ================================ tail-n0f: skipped test: /proc/704592/status: missing or 'different' SKIP: misc/arch (exit: 77) ========================== arch: not built arch: skipped test: required program(s) not built SKIP: misc/cat-proc (exit: 77) ============================== cat-proc: skipped test: no /proc/cpuinfo SKIP: misc/csplit-heap (exit: 77) ================================= csplit-heap: skipped test: this shell lacks ulimit support SKIP: misc/id-context (exit: 77) ================================ grep: can't open /proc/filesystems id-context: skipped test: this system lacks SELinux support FAIL: misc/printenv (exit: 99) ============================== grep: Maximum line length of 2048 exceeded. grep: Maximum line length of 2048 exceeded. printenv: set-up failure: FAIL: misc/printf (exit: 1) =========================== No differences encountered printf: -2147483649: Result too large *** out Sat Oct 8 09:31:10 2011 --- exp Sat Oct 8 09:31:10 2011 *************** *** 8,12 **** 8 =y =y =y =y 9 0 x 10 0x - x 11 x --- 8,11 ---- No differences encountered No differences encountered FAIL: misc/printf-cov (exit: 1) =============================== printf: test d-big-prec: stderr mismatch, comparing d-big-prec.E (actual) and d-big-prec.1 (expected) *** d-big-prec.E Sat Oct 8 09:31:12 2011 --- d-big-prec.1 Sat Oct 8 09:31:11 2011 *************** *** 1,2 **** ! printf: 2147483648: Result too large ! printf: write error: Not enough space --- 1 ---- ! printf: invalid precision: 2147483648 printf: test d-big-fwidth: stderr mismatch, comparing d-big-fwidth.E (actual) and d-big-fwidth.1 (expected) *** d-big-fwidth.E Sat Oct 8 09:31:12 2011 --- d-big-fwidth.1 Sat Oct 8 09:31:12 2011 *************** *** 1,2 **** ! printf: 2147483648: Result too large ! printf: write error: Not enough space --- 1 ---- ! printf: invalid field width: 2147483648 SKIP: misc/printf-surprise (exit: 77) ===================================== printf-surprise: skipped test: this shell lacks ulimit support FAIL: misc/pwd-long (exit: 2) ============================= pwd-long: /zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz: stat failed: No such file or directory SKIP: misc/sort-benchmark-random (exit: 77) =========================================== sort-benchmark-random: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: misc/sort-compress-hang (exit: 77) ======================================== sort-compress-hang: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: misc/sort-compress-proc (exit: 77) ======================================== sort-compress-proc: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP: misc/sort-merge-fdlimit (exit: 77) ======================================== sort-merge-fdlimit: skipped test: this shell lacks ulimit support SKIP: misc/sort-month (exit: 77) ================================ sort-month: skipped test: The locale utility is not present SKIP: misc/sort-spinlock-abuse (exit: 77) ========================================= sort-spinlock-abuse: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: misc/sort-stale-thread-mem (exit: 77) =========================================== sort-stale-thread-mem: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: split/filter (exit: 77) ============================= ./split/filter[21]: xz: not found filter: skipped test: xz (better than gzip/bzip2) required SKIP: split/r-chunk (exit: 77) ============================== r-chunk: skipped test: this shell lacks ulimit support SKIP: misc/stat-nanoseconds (exit: 77) ====================================== ./misc/stat-nanoseconds[19]: print_ver_: not found stat-nanoseconds: skipped test: this file system does not support sub-second time stamps SKIP: misc/stdbuf (exit: 77) ============================ stdbuf: not built stdbuf: skipped test: required program(s) not built SKIP: misc/stty (exit: 77) ========================== stty: skipped test: requires controlling input terminal This test must have a controlling input "terminal", so it may not be run via "batch", "at", or "ssh". On some systems, it may not even be run in the background. SKIP: misc/stty-invalid (exit: 77) ================================== stty-invalid: skipped test: requires controlling input terminal This test must have a controlling input "terminal", so it may not be run via "batch", "at", or "ssh". On some systems, it may not even be run in the background. SKIP: misc/stty-row-col (exit: 77) ================================== stty-row-col: skipped test: requires controlling input terminal This test must have a controlling input "terminal", so it may not be run via "batch", "at", or "ssh". On some systems, it may not even be run in the background. SKIP: misc/su-fail (exit: 77) ============================= su: not built su-fail: skipped test: required program(s) not built SKIP: misc/tac-continue (exit: 77) ================================== tac-continue: skipped test: FULL_PARTITION_TMPDIR not defined SKIP: misc/timeout-group (exit: 77) =================================== ./misc/timeout-group[31]: setsid: not found timeout-group: skipped test: setsid required to control groups FAIL: misc/timeout-parameters (exit: 1) ======================================= timeout: invalid time interval `invalid' Try `timeout --help' for more information. timeout: invalid time interval `invalid' Try `timeout --help' for more information. timeout: invalid time interval `42D' Try `timeout --help' for more information. expr: 4294967295: Result too large timeout: invalid time interval `d' Try `timeout --help' for more information. timeout: invalid: invalid signal Try `timeout --help' for more information. timeout: failed to run command `.': Permission denied timeout: failed to run command `no_such': No such file or directory FAIL: misc/tr (exit: 1) ======================= tr: test bs-at-end.r: stderr mismatch, comparing bs-at-end.r.E (actual) and bs-at-end.r.3 (expected) *** bs-at-end.r.E Sat Oct 8 09:33:42 2011 --- bs-at-end.r.3 Sat Oct 8 09:33:41 2011 *************** *** 0 **** --- 1 ---- + tr: warning: an unescaped backslash at end of string is not portable tr: test bs-at-end.p: stderr mismatch, comparing bs-at-end.p.E (actual) and bs-at-end.p.3 (expected) *** bs-at-end.p.E Sat Oct 8 09:33:42 2011 --- bs-at-end.p.3 Sat Oct 8 09:33:42 2011 *************** *** 0 **** --- 1 ---- + tr: warning: an unescaped backslash at end of string is not portable SKIP: misc/tty-eof (exit: 77) ============================= tty-eof: this script requires Perl's Expect package >=1.11 SKIP: misc/uniq (exit: 77) ========================== uniq: skipping this test -- no appropriate locale SKIP: misc/xattr (exit: 77) =========================== cp: cannot preserve extended attributes, cp is built without xattr support xattr: skipped test: coreutils built without xattr support SKIP: cp/acl (exit: 77) ======================= acl: skipped test: This test requires getfacl and setfacl. SKIP: cp/existing-perm-race (exit: 77) ====================================== existing-perm-race: skipped test: requires membership in two groups this test requires that you be a member of more than one group, but running `id -G' either failed or found just one. If you really are a member of at least two groups, then rerun this test with COREUTILS_GROUPS set in your environment to the space-separated list of group names or numbers. E.g., env COREUTILS_GROUPS='users cdrom' make check SKIP: cp/fiemap-empty (exit: 77) ================================ fiemap-empty: skipped test: disabled for now SKIP: cp/fiemap-perf (exit: 77) =============================== ./cp/fiemap-perf[19]: python: not found fiemap_capable_: python missing: assuming not fiemap capable fiemap-perf: skipped test: this file system lacks FIEMAP support SKIP: cp/fiemap-2 (exit: 77) ============================ ./cp/fiemap-2[19]: python: not found fiemap_capable_: python missing: assuming not fiemap capable fiemap-2: skipped test: this file system lacks FIEMAP support SKIP: cp/file-perm-race (exit: 77) ================================== file-perm-race: skipped test: This test must be run on a local file system. SKIP: cp/link-symlink (exit: 77) ================================ touch: setting times of `link': Function not implemented link-symlink: skipped test: Your system doesn't support updating symlink timestamps SKIP: cp/parent-perm (exit: 77) =============================== parent-perm: skipped test: This test must be run on a local file system. SKIP: cp/parent-perm-race (exit: 77) ==================================== parent-perm-race: skipped test: This test must be run on a local file system. SKIP: cp/perm (exit: 77) ======================== perm: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: cp/preserve-2 (exit: 77) ============================== preserve-2: skipped test: This test must be run on a local file system. SKIP: cp/preserve-slink-time (exit: 77) ======================================= preserve-slink-time: skipped test: this system lacks the utimensat function SKIP: cp/proc-short-read (exit: 77) =================================== proc-short-read: skipped test: your system lacks /proc/kallsyms SKIP: du/2g (exit: 77) ====================== 2g: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: du/bigtime (exit: 77) =========================== bigtime: skipped test: file system cannot represent big time stamps SKIP: du/fd-leak (exit: 77) =========================== fd-leak: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP: du/files0-from-dir (exit: 77) =================================== files0-from-dir: skipped test: cat dir/ succeeds SKIP: du/inaccessible-cwd (exit: 77) ==================================== inaccessible-cwd: skipped test: this system lacks openat support SKIP: du/long-from-unreadable (exit: 77) ======================================== long-from-unreadable: skipped test: This test would fail, since your system lacks /proc support. SKIP: du/move-dir-while-traversing (exit: 77) ============================================= ./du/move-dir-while-traversing[23]: python: not found move-dir-while-traversing: skipped test: python inotify package not installed SKIP: du/slink (exit: 77) ========================= slink: skipped test: This test must be run on a local file system. SKIP: id/no-context (exit: 77) ============================== grep: can't open /proc/filesystems no-context: skipped test: this system lacks SELinux support SKIP: install/install-C-selinux (exit: 77) ========================================== grep: can't open /proc/filesystems install-C-selinux: skipped test: this system lacks SELinux support SKIP: ls/no-cap (exit: 77) ========================== no-cap: skipped test: no strace program SKIP: ls/slink-acl (exit: 77) ============================= ./ls/slink-acl[19]: setfacl: not found slink-acl: skipped test: setfacl does not work on the current file system SKIP: ls/stat-dtype (exit: 77) ============================== stat-dtype: skipped test: '.' is not on a suitable file system for this test SKIP: ls/stat-free-color (exit: 77) =================================== stat-free-color: skipped test: no strace program SKIP: ls/stat-free-symlinks (exit: 77) ====================================== stat-free-symlinks: skipped test: no strace program SKIP: mkdir/selinux (exit: 77) ============================== ./mkdir/selinux[19]: getenforce: not found selinux: skipped test: This test is useful only with SELinux in Enforcing mode. SKIP: mv/acl (exit: 77) ======================= acl: skipped test: This test requires getfacl and setfacl. SKIP: mv/atomic (exit: 77) ========================== atomic: skipped test: no strace program SKIP: mv/atomic2 (exit: 77) =========================== atomic2: skipped test: no strace program SKIP: mv/i-3 (exit: 77) ======================= i-3: skipped test: requires controlling input terminal This test must have a controlling input "terminal", so it may not be run via "batch", "at", or "ssh". On some systems, it may not even be run in the background. SKIP: mv/leak-fd (exit: 77) =========================== leak-fd: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP: mv/part-symlink (exit: 77) ================================ part-symlink: skipped test: This test must be run on a local file system. SKIP: tail-2/assert-2 (exit: 77) ================================ assert-2: skipped test: very expensive: disabled by default This test is very expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_VERY_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_VERY_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-very-expensive SKIP: tail-2/big-4gb (exit: 77) =============================== big-4gb: skipped test: expensive: disabled by default This test is relatively expensive, so it is disabled by default. To run it anyway, rerun make check with the RUN_EXPENSIVE_TESTS environment variable set to yes. E.g., env RUN_EXPENSIVE_TESTS=yes make check or use the shortcut target of the toplevel Makefile, make check-expensive SKIP: touch/no-dereference (exit: 77) ===================================== no-dereference: skipped test: this system lacks the utimensat function SKIP: chown/basic (exit: 77) ============================ basic: skipped test: must be run as root SKIP: cp/cp-a-selinux (exit: 77) ================================ cp-a-selinux: skipped test: must be run as root SKIP: cp/preserve-gid (exit: 77) ================================ preserve-gid: skipped test: must be run as root SKIP: cp/special-bits (exit: 77) ================================ special-bits: skipped test: must be run as root SKIP: cp/cp-mv-enotsup-xattr (exit: 77) ======================================= cp-mv-enotsup-xattr: skipped test: must be run as root SKIP: cp/capability (exit: 77) ============================== capability: skipped test: must be run as root SKIP: cp/sparse-fiemap (exit: 77) ================================= ./cp/sparse-fiemap[19]: python: not found fiemap_capable_: python missing: assuming not fiemap capable sparse-fiemap: skipped test: current file system has insufficient FIEMAP support SKIP: dd/skip-seek-past-dev (exit: 77) ====================================== skip-seek-past-dev: skipped test: must be run as root SKIP: install/install-C-root (exit: 77) ======================================= install-C-root: skipped test: must be run as root SKIP: ls/capability (exit: 77) ============================== capability: skipped test: must be run as root SKIP: ls/nameless-uid (exit: 77) ================================ nameless-uid: skipped test: must be run as root SKIP: misc/chcon (exit: 77) =========================== chcon: skipped test: must be run as root SKIP: misc/chroot-credentials (exit: 77) ======================================== chroot-credentials: skipped test: must be run as root SKIP: misc/selinux (exit: 77) ============================= selinux: skipped test: must be run as root SKIP: misc/truncate-owned-by-other (exit: 77) ============================================= truncate-owned-by-other: skipped test: must be run as root SKIP: mkdir/writable-under-readonly (exit: 77) ============================================== writable-under-readonly: skipped test: must be run as root SKIP: mv/sticky-to-xpart (exit: 77) =================================== sticky-to-xpart: skipped test: must be run as root SKIP: rm/fail-2eperm (exit: 77) =============================== fail-2eperm: skipped test: must be run as root SKIP: rm/no-give-up (exit: 77) ============================== no-give-up: skipped test: must be run as root SKIP: rm/one-file-system (exit: 77) =================================== one-file-system: skipped test: must be run as root SKIP: rm/read-only (exit: 77) ============================= read-only: skipped test: must be run as root SKIP: tail-2/append-only (exit: 77) =================================== append-only: skipped test: must be run as root SKIP: touch/now-owned-by-other (exit: 77) ========================================= now-owned-by-other: skipped test: must be run as root