[Commit-gnuradio] r10441 - usrp-hw/trunk/sym/generated

[matt]

Author: matt
Date: 2009-02-11 17:30:05 -0700 (Wed, 11 Feb 2009)
New Revision: 10441

Added:
   usrp-hw/trunk/sym/generated/ipass-sas-x4-shield.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
Log:
added shield part for ground pins


Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2009-02-11 16:34:39 UTC (rev 
10440)
+++ usrp-hw/trunk/sym/generated/Makefile        2009-02-12 00:30:05 UTC (rev 
10441)
@@ -172,6 +172,7 @@
        cy7c1354cv25-ac-CTRL.sym \
        cy7c1354cv25-ac-RAM.sym \
        ipass-sas-x4.sym \
+       ipass-sas-x4-shield.sym \
        ipass-pcie-x4.sym \
        adl5385-PWR.sym \
        adl5385-MIX.sym \

Added: usrp-hw/trunk/sym/generated/ipass-sas-x4-shield.src
===================================================================
--- usrp-hw/trunk/sym/generated/ipass-sas-x4-shield.src                         
(rev 0)
+++ usrp-hw/trunk/sym/generated/ipass-sas-x4-shield.src 2009-02-12 00:30:05 UTC 
(rev 10441)
@@ -0,0 +1,60 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=IPASS-SAS-X4-SHLD
+device=IPASS-SAS-X4
+refdes=J?
+footprint=IPASS-SAS-X4
+description=Molex iPass SAS X4 connector
+documentation=http://www.molex.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+29             pwr     line    l               GND
+30             pwr     line    l               GND
+31             pwr     line    l               GND
+32             pwr     line    l               GND
+33             pwr     line    l               GND
+34             pwr     line    l               GND
+35             pwr     line    l               GND
+36             pwr     line    l               GND
+37             pwr     line    l               GND