Re: [Bug-xnee] "WARNING: Enough valuators ... still not printing" - what does it mean?

[Henrik Sandklef]

Thanks, for your quick reply

Now the checksum of the tar is the same as on sandklef.com and I've
managed to download and unpack it.

Don't know what went wrong.

/h

On Tue, Apr 17, 2012 at 03:09:56AM +0000, L. Rahyen wrote:
> > New unofficial release here:
> >   http://www.sandklef.com/test/xnee-3.11.90.tar.gz
>       It seems to be broken:
> 
> % tar -xzf xnee-3.11.90.tar.gz                    
> 
> gzip: stdin: unexpected end of file
> tar: Unexpected EOF in archive
> tar: Unexpected EOF in archive
> tar: Error is not recoverable: exiting now
> 
>       Please re-upload it. Thanks again for spending your time to fix this 
> bug.
> 
> > On Thu, Feb 23, 2012 at 12:50:21PM +0100, Henrik Sandklef wrote:
> > > On Wed, Jan 18, 2012 at 10:41:19PM +0000, L. Rahyen wrote:
> > > >         When I run:
> > > > cnee --record --keyboard
> > > > 
> > > >         I get "WARNING: Enough valuators ... still not printing" after 
> > > > every 
> > > > event. What does this mean?
> > > > 
> > > >         Also, empty mouse motion events are recorded in the form of 
> > > > "0,100,0,0,0,0,0,LARGE_NUMBER", and I want to record keyboard-only 
> > > > events. 
> > > 
> > > This does not look like a mouse event (shouldn't say 100 in the second
> > > column). It does however look like a bug :(
> > > 
> > > > By 
> > > > the way, with "--mouse" option empty mouse motion events are also 
> > > > recorded, but 
> > > > useful mouse motion events are recorded too (like 
> > > > "0,6,336,895,0,0,0,LARGE_NUMBER"). It looks like there is a bug 
> > > > somewhere, but 
> > > > perhaps I'm doing something wrong?
> > > 
> > > This looks like a "classic" mouse event. With classic I mean that it
> > > is not an X Input event (which in the first column says 6 or 7).
> > > 
> > > How did you get Xnee (3.11)? From your distribution or did you compile it 
> > > from source?
> > > 
> > > Your log file says  "XI2 not supported." and then it seems to be 
> > > recording XI anyhow. This is odd.
> > > 
> > > Do you have XI? Try doing this to check:
> > >        xdpyinfo | grep -i inputext
> > > 
> > > >         I have attached log file. First, I run "cnee --record 
> > > > --keyboard", then 
> > > > press Shift, then move my mouse a bit, then press Ctrl+C. Expected 
> > > > result is no 
> > > > empty mouse motion events (especially without "--mouse" option), and no 
> > > > WARNINGs, and no segfault when I press Ctrl+C. Instead I got what is 
> > > > shown in 
> > > > the log.
> > > 
> > > Try using "-sk q". This makes Xnee stop recording when you press q.
> > > 
> > > /hesa
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > > % cnee --record --keyboard
> > > > XI2 not supported.
> > > > Failed finding X Input extension devices
> > > > XI2 not supported.
> > > > Failed finding X Input extension devices
> > > > XI2 not supported.
> > > > NOTIFICATION: If you have problem with Xnee and recording device 
> > > > events: File a bug report including this text.
> > > > NOTIFICATION: If you have problem with Xnee and recording device 
> > > > events: File a bug report including this text.
> > > > Workaround: Creating context on data display instead of control 
> > > >             You can ignore this message
> > > > ####################################
> > > > #         System information       #
> > > > ####################################
> > > > # Date:                   2012:01:18 
> > > > # Time:                   21:29:39 
> > > > # Xnee program:           cnee 
> > > > # Xnee version:           3.11 
> > > > # Xnee home:              http://www.gnu.org/software/xnee/ 
> > > > # Xnee info mailing list: address@hidden 
> > > > # Xnee bug mailing list:  address@hidden 
> > > > # X version:              11 
> > > > # X revision:             0 
> > > > # X vendor:               The X.Org Foundation 
> > > > # X vendor release:       11102902 
> > > > # Record version major:   1
> > > > # Record version minor:   13
> > > > # OS name:                Linux 
> > > > # OS Release:             3.1.0-1-amd64 
> > > > # OS Version:             #1 SMP Tue Jan 10 05:01:58 UTC 2012 
> > > > # Machine:                x86_64 
> > > > # Nodename:               comp 
> > > > # Display name:           :0
> > > > # Dimension:              3120x1050
> > > > 
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Xnee application arguments            #
> > > > ##############################################
> > > > #  cnee --record --keyboard 
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Displays                              #
> > > > ##############################################
> > > > # display :0
> > > > # distribute
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Files                                 #
> > > > ##############################################
> > > > # out-file stdout
> > > > # err-file stderr
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Key Grabs                             #
> > > > ##############################################
> > > > # stop-key         0
> > > > # pause-key        0
> > > > # resume-key       0
> > > > # insert-key       0
> > > > # exec-key         0
> > > > # exec-program-key         xnee-exec-no-program
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Recording limits etc                  #
> > > > ##############################################
> > > > 
> > > > events-to-record        -1
> > > > data-to-record          -1
> > > > seconds-to-record       -1
> > > > # first-last
> > > > 
> > > > # Record  all (including current) clients or only future ones
> > > > all-clients
> > > > # future-clients
> > > > 
> > > > # Store the starting mouse position 
> > > > # store-mouse-position
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Resolution                            #
> > > > ##############################################
> > > > 
> > > > # Resolution
> > > > #recorded-resolution  3120x1050
> > > > #replay-resolution  1x1
> > > > #resolution-adjustment  0
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Speed                                 #
> > > > ##############################################
> > > > 
> > > > # Speed
> > > > #speed-percent  100
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Replaying limits etc                  #
> > > > ##############################################
> > > > 
> > > > max-threshold 20 
> > > > min-threshold 20 
> > > > tot-threshold 40 
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Feedback                              #
> > > > ##############################################
> > > > #feedback-none
> > > > #feedback-stderr
> > > > feedback-xosd
> > > >  
> > > > 
> > > > 
> > > > ##############################################
> > > > #      Various                               #
> > > > ##############################################
> > > > 
> > > > # Plugin file 
> > > > 
> > > > # Modes (currently not used)
> > > > # synchronised-replay
> > > > 
> > > > # Replay offset
> > > > #replay-offset 0x0
> > > > 
> > > > # Human printout of X11 data (instead of Xnee format)
> > > > # human-printout  
> > > > 
> > > > # Delay before starting record/replay
> > > > # time 0
> > > > 
> > > > # No recording of ReparentNotify
> > > > # no-reparent-recording 
> > > > 
> > > > # Various
> > > > #########################################
> > > > #          Record settings              #
> > > > #########################################
> > > > #   data_flags          7
> > > > #   rState              0xf3e010
> > > > #   xids[0]             3
> > > > #   xids[1]             0
> > > > # Number of Ranges      2
> > > > # RecordRange[0]
> > > > request-range            0-0
> > > > reply-range                   0-0 
> > > > extension-request-major-range  0-0 
> > > > extension-request-minor-range  0-0 
> > > > extension-reply-major-range   0-0
> > > > extension-reply-minor-range   0-0 
> > > > delivered-event-range         21-21 
> > > > device-event-range            2-3 
> > > > error-range                   0-0 
> > > > # RecordRange[1]
> > > > request-range            0-0
> > > > reply-range                   0-0 
> > > > extension-request-major-range  0-0 
> > > > extension-request-minor-range  0-0 
> > > > extension-reply-major-range   0-0
> > > > extension-reply-minor-range   0-0 
> > > > delivered-event-range         0-0 
> > > > device-event-range            100-102 
> > > > error-range                   0-0 
> > > > Workaround: Creating context on data display instead of control 
> > > >             You can ignore this message
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151626341
> > > > 0,2,0,0,0,50,0,151626341
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151626341
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,102,0,0,0,0,0,151626565
> > > > 0,3,0,0,0,50,0,151626565
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,102,0,0,0,0,0,151626565
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151630352
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151630352
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151632192
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151632192
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151632400
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151632400
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151633661
> > > > 0,2,0,0,0,64,0,151633661
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151633661
> > > > ^Csighandler SIGINT (2)
> > > > Workaround: Creating context on data display instead of control 
> > > >             You can ignore this message
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151633837
> > > > zsh: segmentation fault  cnee --record --keyboard
> > > 
> > > > _______________________________________________
> > > > Bug-xnee mailing list
> > > > address@hidden
> > > > https://lists.gnu.org/mailman/listinfo/bug-xnee
> > > 
> > > 
> > > _______________________________________________
> > > Bug-xnee mailing list
> > > address@hidden
> > > https://lists.gnu.org/mailman/listinfo/bug-xnee
> > > 
> > 
> 
> _______________________________________________
> Bug-xnee mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/bug-xnee
>