[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: with a raid0 disk - "Can't have a partition outside the disk"
From: |
Jim Meyering |
Subject: |
Re: with a raid0 disk - "Can't have a partition outside the disk" |
Date: |
Mon, 27 Feb 2012 20:36:57 +0100 |
Peter Maloney wrote:
> Problem:
>
> I tried to print the partition table of the first disk in a raid0 set
> (using the raw disk rather than a RAID device), expecting the partitions
> to be displayed with the partition outside the disk, but instead parted
> refuses to work:
>
> # parted -s /dev/sdd unit s print
> Error: Can't have a partition outside the disk!
>
> It is clearly not an error. And in my case it is even a read only
> operation, which would not even have any side effects if something
Thanks for the report.
Which version of parted are you using?
If it's not 3.0, can you see if the problem persists when
using that newer version?
ftp://ftp.gnu.org/gnu/parted/parted-3.0.tar.xz