============================================ GNU parted 1.9.0: tests/test-suite.log ============================================ 6 of 24 tests failed. .. contents:: :depth: 2 FAIL: t2000-mkfs.sh (exit: 1) ============================= * ok 1: create a file large enough to hold a fat32 file system * ok 2: label the test disk * ok 3: expect no output * ok 4: create a partition * ok 5: create an msdos file system * ok 6: expect no output * ok 7: create a file large enough to hold a fat32 file system * ok 8: label the test disk * ok 9: expect no output * ok 10: create input file * ok 11: create a partition and a filesystem in the same session * ok 12: normalize the actual output * ok 13: check for expected prompt * ok 14: setup: create and label a device * ok 15: try to create a file system with invalid type name * ok 16: normalize the actual output * FAIL 17: check for expected diagnostic { echo "parted: invalid token: bogus" echo "Error: Expecting a file system type."; } > exp && compare out exp * ok 18: setup: create and label a device * ok 19: try to create an ext2 file system of size 16795000 * ok 20: check for empty output * ok 21: setup: create and label a device * ok 22: try to create an ext2 file system of size 16796000 * ok 23: check for empty output * ok 24: setup: create and label a device * ok 25: try to create an ext2 file system of size 16796160 * ok 26: check for empty output * ok 27: setup: create and label a device * ok 28: try to create an ext2 file system of size 16797000 * ok 29: check for empty output * ok 30: setup: create and label a device * ok 31: try to create an ext2 file system of size 16798000 * ok 32: check for empty output * ok 33: setup: create and label a device * ok 34: try to create an ext2 file system of size 17154000 * ok 35: check for empty output * ok 36: setup: create and label a device * ok 37: try to create an ext2 file system of size 17155000 * ok 38: check for empty output * ok 39: setup: create and label a device * ok 40: try to create an ext2 file system of size 17156000 * ok 41: check for empty output * ok 42: setup: create and label a device * ok 43: try to create an ext2 file system of size 17157000 * ok 44: check for empty output * ok 45: setup: create and label a device * ok 46: try to create an ext2 file system of size 17158000 * ok 47: check for empty output * ok 48: setup: create and label a device * ok 49: try to create an ext2 file system of size 25184000 * ok 50: check for empty output * ok 51: setup: create and label a device * ok 52: try to create an ext2 file system of size 25185000 * ok 53: check for empty output * ok 54: setup: create and label a device * ok 55: try to create an ext2 file system of size 25186000 * ok 56: check for empty output * ok 57: setup: create and label a device * ok 58: try to create an ext2 file system of size 25589000 * ok 59: check for empty output * ok 60: setup: create and label a device * ok 61: try to create an ext2 file system of size 25589000 * ok 62: check for empty output * ok 63: setup: create and label a device * ok 64: try to create an ext2 file system of size 25590000 * ok 65: check for empty output * failed 1 among 65 test(s) FAIL: t4100-msdos-partition-limits.sh (exit: 1) =============================================== * FAIL 1: create an XFS file system dd if=/dev/zero of=$fs bs=1MB count=2 seek=20 && mkfs.xfs -q $fs && mkdir "$mp" * FAIL 2: mount it mount -o loop $fs "$mp" && cd "$mp" * FAIL 3: msdos: a partition length of 2^32-1 works. end=$(echo $n+2^32-2|bc) && do_mkpart $n $end * FAIL 4: print the result parted -s $dev unit s p > out 2>&1 && sed -n "/^ *1 *$n/s/ */ /gp" out|sed "s/ *\$//" > k && mv k out && echo " 1 ${n}s ${end}s 4294967295s primary" > exp && diff -u out exp * ok 5: msdos: a partition length of exactly 2^32 sectors provokes failure. * FAIL 6: check for new diagnostic bad_part_length 4294967296 > exp && diff -u err exp * ok 7: msdos: a partition length of 2^32+1 sectors provokes failure. * FAIL 8: check for new diagnostic bad_part_length 4294967296 > exp && diff -u err exp * FAIL 9: msdos: a partition start sector number of 2^32-1 works. do_mkpart_start_and_len $(echo 2^32-1|bc) 1000 * FAIL 10: print the result parted -s $dev unit s p > out 2>&1 && sed "s/Disk .*:/Disk:/;s/ *$//" out > k && mv k out && diff -u out exp * ok 11: msdos: a partition start sector number of 2^32 must fail. * FAIL 12: check for new diagnostic bad_start_sector 4294967296 > exp && diff -u err exp * ok 13: msdos: a partition start sector number of 2^32+1 must fail, too. * FAIL 14: check for new diagnostic bad_start_sector 4294967296 > exp && diff -u err exp * failed 10 among 14 test(s) FAIL: t4100-dvh-partition-limits.sh (exit: 1) ============================================= * FAIL 1: create an XFS file system dd if=/dev/zero of=$fs bs=1MB count=2 seek=20 && mkfs.xfs -q $fs && mkdir "$mp" * FAIL 2: mount it mount -o loop $fs "$mp" && cd "$mp" * FAIL 3: dvh: a partition length of 2^32-1 works. end=$(echo $n+2^32-2|bc) && do_mkpart $n $end * FAIL 4: print the result parted -s $dev unit s p > out 2>&1 && sed -n "/^ *1 *$n/s/ */ /gp" out|sed "s/ *\$//" > k && mv k out && echo " 1 ${n}s ${end}s 4294967295s primary" > exp && diff -u out exp * ok 5: dvh: a partition length of exactly 2^32 sectors provokes failure. * FAIL 6: check for new diagnostic bad_part_length 4294967296 > exp && diff -u err exp * ok 7: dvh: a partition length of 2^32+1 sectors provokes failure. * FAIL 8: check for new diagnostic bad_part_length 4294967297 > exp && diff -u err exp * FAIL 9: dvh: a partition start sector number of 2^32-1 works. do_mkpart_start_and_len $(echo 2^32-1|bc) 1000 * FAIL 10: print the result parted -s $dev unit s p > out 2>&1 && sed "s/Disk .*:/Disk:/;s/ *$//" out > k && mv k out && diff -u out exp * ok 11: dvh: a partition start sector number of 2^32 must fail. * FAIL 12: check for new diagnostic bad_start_sector 4294967296 > exp && diff -u err exp * ok 13: dvh: a partition start sector number of 2^32+1 must fail, too. * FAIL 14: check for new diagnostic bad_start_sector 4294967297 > exp && diff -u err exp * failed 10 among 14 test(s) FAIL: t5000-tags.sh (exit: 1) ============================= * ok 1: setup: create zeroed device * ok 2: create gpt label * ok 3: add a partition * ok 4: print the table (before manual modification) 0+1 records in 0+1 records out 16 bytes (16 B) copied, 0.00021567 s, 74.2 kB/s * ok 5: print the table (after manual modification) * ok 6: prepare actual and expected output * FAIL 7: check for expected output compare out exp * failed 1 among 7 test(s) FAIL: t6000-dm.sh (exit: 1) =========================== * ok 1: setup: create loop devices * ok 2: setup: create a linear mapping * ok 3: run parted -s "$dev" mklabel msdos * ok 4: check for empty output * ok 5: determine the map type * ok 6: create expected output file * ok 7: check its output * FAIL 8: setup: create a multipath mapping echo 0 1024 multipath 0 0 1 1 round-robin 0 2 0 "$d2" "$d3" \ | dmsetup create "$mpath_" && dev="$DM_DEV_DIR"/mapper/"$mpath_" * ok 9: run parted -s "$dev" mklabel msdos * ok 10: check for empty output * ok 11: determine the map type * ok 12: create expected output file * FAIL 13: check its output compare out exp * failed 2 among 13 test(s) device-mapper: remove ioctl failed: No such device or address Command failed FAIL: t7000-scripting.sh (exit: 1) ================================== * ok 1: Create the test file * ok 2: Test the scripting mode of mkpart * ok 3: Compare the real error and the expected one * ok 4: Create the test file * ok 5: Test the interactive mode of mkpart * ok 6: normalize the actual output * FAIL 7: Compare the real error and the expected one compare out errI * ok 8: Create the test file * ok 9: Test the scripting mode of mkpartfs * ok 10: Compare the real error and the expected one * ok 11: Create the test file * ok 12: Test the interactive mode of mkpartfs * ok 13: normalize the actual output * FAIL 14: Compare the real error and the expected one compare out errI * failed 2 among 14 test(s)