Partition Resize

[Werlen Roger - Visp]

Hi

I expand my RAID with 2 Disk. The new size is 86GB (6*18GB RAID 5). I should
grow the device first (with the RAID tools). This was successfully.
Afterwards I started parted:

address@hidden root]# parted /dev/cciss/c0d1
GNU Parted 1.4.16
Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
This program is free software, covered by the GNU General Public License.

This program is distributed in the hope that it will be useful, but WITHOUT
ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A
PARTICULAR PURPOSE.  See the GNU General Public License for more details.

Using /dev/cciss/c0d1
Warning: The operating system thinks the geometry on /dev/cciss/c0d1 is
21791/255/32.  Therefore, cylinder 1024 ends at 4079.999M.  You should check
that this matches the BIOS geometry before using this program.
(parted) p
Disk geometry for /dev/cciss/c0d1: 0.000-86823.515 megabytes
Disk label type: loop
Minor    Start       End     Filesystem  Flags
1          0.000  86823.515  ext2


What I need to do for resize the /dev/cciss/c0d1 partition? 

address@hidden root]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/cciss/c0d0p7     370M  246M  105M  71% /
/dev/cciss/c0d0p1      50M  7.9M   39M  17% /boot
/dev/cciss/c0d0p8     4.7G   38M  4.3G   1% /home
none                 1006M     0 1005M   0% /dev/shm
/dev/cciss/c0d0p2     9.4G  1.5G  7.4G  17% /usr
/dev/cciss/c0d0p6     247M  198M   36M  85% /var
/dev/cciss/c0d1        50G   44G  3.5G  93% /nsr
address@hidden root]#

It would be of great help to me when you can help me. Thanks!!!

With Kind Regards

Roger Werlen
Informatik Systemtechnik
> Lonza AG
> CH-3930 Visp, Schweiz
> Tel. +41 (27) 948-6622
> Fax +41 (27) 947-6622
mailto:address@hidden
http://www.lonza.com