[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Debian/Hurd d-i installation report
From: |
Justus Winter |
Subject: |
Debian/Hurd d-i installation report |
Date: |
Tue, 22 Oct 2013 14:59:06 +0200 |
User-agent: |
alot/0.3.4 |
Hi,
I just installed Debian/Hurd using d-i [0] on a VIA Eden mini-ITX
mainboard [1]. I just used the first cd for the installation, no
network mirror. All in all it went fine, some remarks:
* No passive translator was installed on /proc.
* The tasksel step looked strange, there was just one empty line and
one saying something like "standard system utilities".
Hardware support:
* The internal network card [2] isn't working, though there seems to
be a netdde based driver. Haven't investigated this further.
* I installed a 250GB hard disk but it doesn't show up with the full
capacity, dunno why.
* I hooked up my vt510 terminal to the serial port and started a getty
on that port. This works, but if (this is just empirical) lot's of
text is sent to the terminal, gnumach writes 'Tty %p stuck...' to
the console. Typing on the keyboard seems to help get it unstuck,
but if I run either top or htop that update frequently, the terminal
becomes unusable.
I plan to use this system for performance measurements and as a
demonstration box for conferences. I'll keep you posted.
Cheers,
Justus
0:
http://people.debian.org/~sthibault/hurd-i386/installer/cdimage/cd-1.iso
with timestamp '30-Jun-2013 09:01'
1:
http://www.viaembedded.com/en/products/boards/201/1/EPIA_TC-Series_Mini-ITX_Board_%28EOL%29.html
2:
The handbook identifies it as "VIA VT6103 10/100 Base-T Ethernet PHY".
signature.asc
Description: signature