Majordomo results: Re: Re: Document

[majordomo]

--

>>>> This is a multi-part message in MIME format.
**** Command 'this' not recognized.
>>>> 
>>>> ------=_NextPart_000_0013_000066DD.00007049
**** Command '------=_nextpart_000_0013_000066dd.00007049' not recognized.
>>>> Content-Type: text/plain;
**** Command 'content-type:' not recognized.
>>>>    charset="Windows-1252"
**** Command 'charset="windows-1252"' not recognized.
>>>> Content-Transfer-Encoding: 7bit
**** Command 'content-transfer-encoding:' not recognized.
>>>> 
>>>> ALERT!!!
**** Command 'alert!!!' not recognized.
>>>> This e-mail contained one or more infected files.
**** Command 'this' not recognized.
>>>> The following attachments were infected and have been repaired:
**** Command 'the' not recognized.
>>>> 
>>>> No attachments are in this category.
**** Command 'no' not recognized.
>>>> 
>>>> The following infected attachments were deleted:
**** Command 'the' not recognized.
>>>> 
>>>> 1. your_document.pif: address@hidden
**** Command '1.' not recognized.
>>>> 
>>>> You may wish to contact the sender to notify them about their infected 
>>>> file(s).
**** Command 'you' not recognized.
>>>> 
>>>> Thank you,
**** Command 'thank' not recognized.
>>>> 
>>>> -- JARING E-Mail Virus Scanner
**** Command '--' not recognized.
>>>> 
>>>> ------------ Original message text follows ------------
**** Command '------------' not recognized.
>>>> 
>>>> 
>>>> Your file is attached.
**** Command 'your' not recognized.
>>>> 
>>>> ------=_NextPart_000_0013_000066DD.00007049
**** Command '------=_nextpart_000_0013_000066dd.00007049' not recognized.
>>>> Content-Type: text/plain;
**** Command 'content-type:' not recognized.
>>>>    name="DELETED0.TXT"
**** Command 'name="deleted0.txt"' not recognized.
>>>> Content-Transfer-Encoding: base64
**** Command 'content-transfer-encoding:' not recognized.
>>>> Content-Disposition: attachment;
**** Command 'content-disposition:' not recognized.
>>>>    filename="DELETED0.TXT"
**** Command 'filename="deleted0.txt"' not recognized.
>>>> 
>>>> ZmlsZSBhdHRhY2htZW50OiB5b3VyX2RvY3VtZW50LnBpZg0KDQpUaGUgZmlsZSBhdHRhY2hl
**** Command 
'zmlszsbhdhrhy2htzw50oib5b3vyx2rvy3vtzw50lnbpzg0kdqpuagugzmlszsbhdhrhy2hl' not 
recognized.
>>>> ZCB0byB0aGlzIGVtYWlsIHdhcyByZW1vdmVkIGJlY2F1c2UgaXQgaXMgaW5mZWN0ZWQgd2l0
**** Command 
'zcb0byb0aglzigvtywlsihdhcybyzw1vdmvkigjly2f1c2ugaxqgaxmgaw5mzwn0zwqgd2l0' not 
recognized.
>>>> aCB0aGUgVzMyLk5ldHNreS5EQG1tIHZpcnVzLg0K
**** Command 'acb0agugvzmylk5ldhnres5eqg1tihzpcnvzlg0k' not recognized.
>>>> ------=_NextPart_000_0013_000066DD.00007049--
**** Command '------=_nextpart_000_0013_000066dd.00007049--' not recognized.
>>>> 
>>>> 
**** No valid commands found.
**** Commands must be in message BODY, not in HEADER.

**** Help for address@hidden:


This help message is being sent to you from the mailing list management
system at address@hidden

This is an automated system which allows users to subscribe and 
unsubscribe to mailing lists. You can interact with the mailing list 
management system software by sending it commands in the body of mail 
messages addressed to "address@hidden".  **** Commands in the
"Subject:" line are NOT processed.

You may put multiple commands in the same mail message. Put each 
command on a line by itself.

If you use a "signature block" at the end of your mail, please delete it
as the system may mistakenly believe each line of your message is a command 
and you will then receive spurious error messages.

Here are some of the things you can do:

I.      FINDING OUT WHICH LISTS ARE ON THIS SYSTEM

To get a list of publicly-available mailing lists on this system, put the
following line in the body of your mail message to address@hidden:

        lists

Each line will contain the name of a mailing list and a brief description
of the list. Most of the list are linking with USENET newsgroups. High 
volume of e-mail are expected. To get more information about a particular 
list, use the "info" command, supplying the name of the list.  For example,
if the name of the list about which you wish information is "demo-list", 
you would put the line

        info demo-list

in the body of the mail message.

II.     SUBSCRIBING TO A LIST

Once you've determined that you wish to subscribe to one or more lists on
this system, you can send commands to Majordomo to have it add you to the
list, so you can begin receiving mailings.

To receive list mail at the address from which you're sending your mail,
simply say "subscribe" followed by the list's name:

        subscribe demo-list

If for some reason you wish to have the mailings go to a different address
(a friend's address, a specific other system on which you have an account,
or an address which is more correct than the one that automatically appears 
in the "From:" header on the mail you send), you would add that address to
the command.  For instance, if you're sending a request from your work
account, but wish to receive "demo-list" mail at your personal account
(for which we will use "address@hidden" as an example), you'd put
the line

        subscribe demo-list address@hidden

in the mail message body.  To subscribe in digest mode, simply add "-digest" 
after the list's name:

        subscribe demo-list-digest

NOTE: Digest mode subscribers need to post their message to:
      <demo-list>@jaring.my instead of <demo-list-digest>@jaring.my.

You will receive a notification that an authorization key is required for 
subscription.  Another message will be sent to the address to be subscribed 
(which may or may not be the same as yours) containing the key, and 
directing the user to send a command found in that message back to 
address@hidden  (This can be a bit of extra hassle, but it helps 
keep you from being swamped in extra email by someone who forged requests 
from your address.)  You may also get a message that your subscription is 
being forwarded to the list owner for approval; some lists have waiting 
lists, or policies about who may subscribe.  If your request is forwarded 
for approval, the list owner should contact you soon after your request.

Upon subscribing, you should receive an introductory message, containing
list policies and features.  Save this message for future reference; it
will also contain exact directions for unsubscribing.  If you lose the
intro mail and would like another copy of the policies, send this message
to address@hidden:

        intro demo-list

III.    UNSUBSCRIBING FROM MAILING LISTS

Your original intro message contains the exact command which should be
used to remove your address from the list.  However, in most cases, you
may simply send the command "unsubscribe" followed by the list name:

        unsubscribe demo-list

To remove an address other than the one from which you're sending
the request, give that address in the command:

        unsubscribe demo-list address@hidden

In either of these cases, you can tell address@hidden to remove
the address in question from all lists on this server by using "*"
in place of the list name:

        unsubscribe *
        unsubscribe * address@hidden

Similar applied for digest mode:
        unsubscribe demo-list-digest
        unsubscribe demo-list-digets address@hidden

IV.     FINDING THE LISTS TO WHICH AN ADDRESS IS SUBSCRIBED

To find the lists to which your address is subscribed, send this command
in the body of a mail message to address@hidden:

        which 

Note that you can view your address only.

V.      RETRIEVING FILES FROM A LIST'S ARCHIVES

Archives of lists can be found at
        ftp://ftp.jaring.my/pub/archives/


VII.    GETTING MORE HELP

To contact a human site manager, send mail to address@hidden
To contact the owner of a specific list, send mail to that list's
approval address, which is formed by adding "-approval" to the user-name
portion of the list's address.  For instance, to contact the list owner
for address@hidden, you would send mail to address@hidden

To get another copy of this help message, send mail to address@hidden
with a line saying

        help

in the message body.

VIII.   COMMAND SUMMARY FOR ADVANCED USERS

In the description below items contained in []'s are optional. When
providing the item, do not include the []'s around it.  Items in angle
brackets, such as <address>, are meta-symbols that should be replaced
by appropriate text without the angle brackets.

It understands the following commands:

    subscribe <list> [<address>]
        Subscribe yourself (or <address> if specified) to the named <list>.
        
    unsubscribe <list> [<address>]
        Unsubscribe yourself (or <address> if specified) from the named <list>.
        "unsubscribe *" will remove you (or <address>) from all lists.  This
        _may not_ work if you have subscribed using multiple addresses.

    get <list> <filename>
        Get a file related to <list>.

    which [<address>]
        Find out which lists you are on.

    info <list>
        Retrieve the general introductory information for the named <list>.

    intro <list>
        Retrieve the introductory message sent to new users.  Non-subscribers
        may not be able to retrieve this.

    lists
        Show the lists served by this Majordomo server.

    help
        Retrieve this message.

    end
        Stop processing commands (useful if your mailer adds a signature).

Commands should be sent in the body of an email message to
"address@hidden". Multiple commands can be processed provided
each occurs on a separate line.

Commands in the "Subject:" line are NOT processed.

If you have any questions or problems, please contact
"address@hidden".