[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bugs #11220] UNICOS 9.0 - can't figure out how to use your getmntent()
From: |
Mark D Baushke |
Subject: |
[bugs #11220] UNICOS 9.0 - can't figure out how to use your getmntent() |
Date: |
Mon, 06 Dec 2004 11:55:20 -0500 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.5) Gecko/20041117 Firefox/1.0 |
This mail is an automated notification from the bugs tracker
of the project: findutils.
/**************************************************************************/
[bugs #11220] Latest Modifications:
Changes by:
Mark D Baushke <address@hidden>
'Date:
Mon 12/06/2004 at 16:48 (GMT)
------------------ Additional Follow-up Comments ----------------------------
findutils-4.2.10 gets further but does not have an EOVERFLOW
symbol, so that code needs to be protected.
There is also some strange binary output in the config.out
as a part of the fact that configure contains a bare reference
to gl_CHECK_TYPE_STRUCT_DIRENT_D_INO before the check for
ssize_t on line 6129. Obviously, this should be fixed too.
Patching find/find.c to protect the EOVERFLOW with #ifdef
lets the compilation finish with only warnings.
It should be noticed that the latest GNULIB stuff seems to
have re-introduced the LIBS=-lsun in the find/Makefile, so
the GNULIB folks probably need to be more careful.
As the machine does not have 'runtest' installed, it is not
possible to use 'make check' to do anything meaningful. I
did a few sample 'find' commands myself and they seemed to
work okay.
/**************************************************************************/
[bugs #11220] Full Item Snapshot:
URL: <http://savannah.gnu.org/bugs/?func=detailitem&item_id=11220>
Project: findutils
Submitted by: Mark D Baushke
On: Sun 12/05/2004 at 19:39
Category: None
Severity: 5 - Average
Item Group: None
Resolution: None
Privacy: Public
Assigned to: jay
Originator Name:
Originator Email:
Status: Open
Release: 4.2.9
Fixed Release: None
Summary: UNICOS 9.0 - can't figure out how to use your getmntent()
Original Submission: The configure step of findutils-4.2.9 failes on a
CRAY Y-MP EL running UNICOS 9.0
checking how to call getmntent()... configure: error: I can't figure out how to
use your getmntent() function.
config.log has the following:
configure:18149: checking how to call getmntent()
configure:18181: cc -c -g conftest.c >&5
cc-106 cc: WARNING File = conftest.c, Line = 185
The declaration of "MMM" has no type specifier.
cc-498 cc: ERROR File = conftest.c, Line = 185
A "," or ")" is expected where "*" appears in a function prototype.
cc-428 cc: ERROR File = conftest.c, Line = 185
The type of "getmntent" is not compatible with its previously declared type.
cc-645 cc: ERROR File = conftest.c, Line = 185
There is no comma or semicolon after a declaration.
Follow-up Comments
------------------
-------------------------------------------------------
Date: Mon 12/06/2004 at 16:48 By: Mark D Baushke <mbaushke>
findutils-4.2.10 gets further but does not have an EOVERFLOW
symbol, so that code needs to be protected.
There is also some strange binary output in the config.out
as a part of the fact that configure contains a bare reference
to gl_CHECK_TYPE_STRUCT_DIRENT_D_INO before the check for
ssize_t on line 6129. Obviously, this should be fixed too.
Patching find/find.c to protect the EOVERFLOW with #ifdef
lets the compilation finish with only warnings.
It should be noticed that the latest GNULIB stuff seems to
have re-introduced the LIBS=-lsun in the find/Makefile, so
the GNULIB folks probably need to be more careful.
As the machine does not have 'runtest' installed, it is not
possible to use 'make check' to do anything meaningful. I
did a few sample 'find' commands myself and they seemed to
work okay.
-------------------------------------------------------
Date: Mon 12/06/2004 at 00:58 By: James Youngman <jay>
Please try findutils-4.2.10, which I have just uploaded to alpha.gnu.org. It
now uses a gnulib function to enumerate the system's mounted file systems.
That should be more portable.
-------------------------------------------------------
Date: Sun 12/05/2004 at 19:41 By: Mark D Baushke <mbaushke>
Attached the output of the ./configure >& config.out
as well as the full config.log and a copy of
/usr/include/mntent.h
File Attachments
-------------------
-------------------------------------------------------
Date: Mon 12/06/2004 at 16:48 Name: unicos-problems-4.2.10.tar.gz Size:
47.67KB By: mbaushke
Attached the output of (./configure && make)>& config.out, the
full config.log, config.h, find.c.diff find/Makefile and
/usr/include/sys/errno.h
http://savannah.gnu.org/bugs/download.php?item_id=11220&item_file_id=1950
-------------------------------------------------------
Date: Sun 12/05/2004 at 19:41 Name: unicos-problem.tar.gz Size: 24.9KB By:
mbaushke
config.out config.log /usr/include/mntent.h
http://savannah.gnu.org/bugs/download.php?item_id=11220&item_file_id=1945
For detailed info, follow this link:
<http://savannah.gnu.org/bugs/?func=detailitem&item_id=11220>
_______________________________________________
Message sent via/by Savannah
http://savannah.gnu.org/