[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
"Input/output" error with "dd"
From: |
Christian Kolly |
Subject: |
"Input/output" error with "dd" |
Date: |
Tue, 18 Mar 2003 08:57:30 +0100 |
Hello,
I have some file created with the command
# /sbin/dump uq0fz2 /backup/db1.dmp /database/dsk1
And I cann restore from the file "/backup/db1.dmp" without any problem.
Now, I wannt to put this file to a DLT tape using the following command:
#/bin/dd bs=64k if=/backup/db1.dmp of=/dev/nst0
And I get thIS output to the screen:
---------------------------------------------------------------
182+1 records in
182+1 records out
/bin/dd: closing output file '/dev/nst0': Input/output error
---------------------------------------------------------------
The same command with the dump from an other day may work.
The same command with the dump from an other file system may work.
I try to replace the tape, the tape drive and the scsi cable: no change
A dumpfile give an error avery time a try the dd command or never.
dd version : 4.1
kernel version : 2.4.9
scsi card : Adaptec AIC-7892 Ultra 160/m
Tape changer : Dell Powervault 122T
Any idee?
Thanks
Christian
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- "Input/output" error with "dd",
Christian Kolly <=