bug-ddrescue
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Bug-ddrescue] DDRescue me... please..


From: Charles Hemingway
Subject: Re: [Bug-ddrescue] DDRescue me... please..
Date: Thu, 25 Jun 2009 07:39:19 -0500
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1b3pre) Gecko/20090513 Fedora/3.0-2.3.beta2.fc11 Thunderbird/3.0b2

mufngruf:

Since you mentioned that this is an old ibook, I'll assume it's PPC Mac
with a Macintosh bootlabel.  You'll have to look closely when you snag
your partition, the first 6 or 8 are typically Macintosh HD drivers for
OS 9.  Even if you only used OS X on this notebook, chances are the OS 9
HD drivers are in there.

For instance, my primary OS X disk is /dev/sda9 in my PowerBook.  Your
experience may be different, and it may move around when you put it into
another machine.  Also, do a google search for iBook Take Apart, and try
to be specific (iBook, iBook SE, Late 2001 etc). The differences are
important.  Go here if you need clarification: http://apple-history.com/

Good Luck,
Charles

On 06/25/2009 01:43 AM, Tom wrote:
> There are several ways you could proceed.� Basically you need to
> create a copy of the bad disk bit by bit onto a good disk, preferably
> a new one.� To achive this you need the bad disk and the good disk
> connected to the same machine, which can be as simple as plugging them
> into spare slots on a desktop machine or by using a sata usb cable
> like the one here
> http://www.pccasegear.com/index.php?main_page=product_info&products_id=8423
> <http://www.pccasegear.com/index.php?main_page=product_info&products_id=8423>.�
> I would strongly suggest removing any other disks from that machine so
> there is no way possible to overwrite anything you want. � When you
> have them connected you boot this machine off a program like
> systemrescuecd�� http://www.sysresccd.org/Main_Page� that runs from a
> cd drive or usb flash disk.� From there you would use ddrescue from
> the command line to copy as much of the bad disk as possible to the
> good disk so you can do data recovery on the good disk.� It is
> important not to work the bad disk any more than necessary it as it
> might fail completely at any time.� The new disk must be as big or
> larger than the bad one and you use a command like���� fdisk -l��� to
> find the path, which will be something like���� /dev/sda��� and���
> /dev/sdb�� .��
>
>
> I dont know if system rescue cd will work with a fire wire connection.�
>
> You dont need to mount either bad or good disks for ddrescue to work
> so dont worry about it, but do take my advice and physically remove
> any other disks from the machine before you begin.
>
>
> Tom�
>
>
> On Thu, Jun 25, 2009 at 3:59 PM, mufngruf <address@hidden
> <mailto:address@hidden>> wrote:
>
>
>     Please forgive me if this is a resend... I'm new to this system - duh!
>
>     I have an intel imac which does basic stuff, cos that's mostly
>     what I need.
>     I have an old ibook which has lots of family stuff on it and the
>     small drive
>     seems to have become suddenly corrupted.. "the volume could not be
>     repaired
>     - underlying task reported failure on exit" and that sort of
>     thing. Disk
>     warrior, or disk utility cannot rebuild/repair the thing. I can
>     get it to
>     start up with the installation disk in the drive but it will not
>     install a
>     new system on the existing volume unless I reformat the drive -
>     and lose all
>     the data.
>     I can firewire target the disc and it shows up on the imac but I
>     cannot drag
>     any files across... it just seizes up both machines when I try. I
>     don't
>     think there's a "mount point" - whatever that is..
>     I do not understand even the most basic command line
>     instructions... which
>     is why, after all the other newbies got their questions answered,
>     I STILL
>     can't figure it out.
>     I have downloaded ddrescue-1.10 which contains 20 items - none of
>     which can
>     I recognise as anything that I can do anything with.
>     Please pretend that you have to give a step by step in this
>     process to a
>     small, albeit fairly smart, kid who just glazes over at the
>     technotalk.
>     Can anyone please help. I'm not trying to save the drive, just the
>     data.
>     Thank you in advance for your time, patience AND CONSIDERATION.
>     --
>     View this message in context:
>     http://www.nabble.com/DDRescue-me...-please..-tp24194391p24194391.html
>     Sent from the Gnu - ddrescue mailing list archive at Nabble.com.
>
>
>
>     _______________________________________________
>     Bug-ddrescue mailing list
>     address@hidden <mailto:address@hidden>
>     http://lists.gnu.org/mailman/listinfo/bug-ddrescue
>
>

Attachment: signature.asc
Description: OpenPGP digital signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]