[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
df reporting problem with raid
From: |
Steven Fishback |
Subject: |
df reporting problem with raid |
Date: |
Fri, 08 Sep 2006 12:46:16 -0400 |
User-agent: |
Thunderbird 1.5.0.5 (Windows/20060719) |
I recently setup raid 1 disks on my Linux OS.
The other 300+ kickstart nodes are exactly the same minus the raid setup
and are working fine.
So I'm only guessing the raid setup has df reporting incorrectly for the
nfs mounts???
I'm using RHEL 3.0AS 2.4.21-4.ELsmp
df is from coreutils-4.5.3-26
The output that off is for a NFS mounted NetApp storage device.
See the last four lines at the bottom of the output.
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 4.8G 3.2G 1.3G 72% /
/dev/md0 46M 22M 23M 49% /boot
none 2.0G 0 2.0G 0% /dev/shm
/dev/md4 25G 72K 24G 1% /tmp
/dev/md2 965M 32M 885M 4% /usr/vice/cache
/dev/md3 965M 87M 830M 10% /var
trunk:/vol/scr 1.1T 28G 1.1T 3% /scr
trunk:/vol/scr 1.1T 28G 1.1T 3% /netscr
trunk:/vol/nas 821G -8.0Z 1019G 101% /nas
AFS 1.1P 0 1.1P 0% /afs
It should report this:
trunk:/vol/scr 3.1T 2.1T 1.1T 66% /scr
trunk:/vol/scr 3.1T 2.1T 1.1T 66% /netscr
trunk:/vol/nas 2.9T 1.9T 1019G 65% /nas
AFS 8.6G 0 8.6G 0% /afs
--
Steven Fishback
ITS Research Computing, Systems Programmer
University of North Carolina-CH
CB# 3455, Phillips Hall, Rm18
Office: 919-843-9142
- df reporting problem with raid,
Steven Fishback <=