[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bino-list] bino and hdmi frame pack
From: |
Robert Pliszko |
Subject: |
Re: [Bino-list] bino and hdmi frame pack |
Date: |
Tue, 03 Jul 2012 12:28:09 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux i686; rv:10.0.5) Gecko/20120623 Thunderbird/10.0.5 |
On 03.07.2012 11:38, Stefan Eilemann wrote:
I've been using the attached xorg.conf with success.
Thanks Stefan. I've modified my xorg.conf:
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
# ModelName "CEI Crestron"
# DisplaySize 650 406
HorizSync 26.0 - 68.0
VertRefresh 23.0 - 61.0
Option "DPMS"
Modeline "1360x768_60" 85.50 1360 1424 1536 1792 768 771 777 795
+hsync +vsync
Modeline "1280x720_60" 74.25 1280 1390 1430 1650 720 725 730 750
+hsync +vsync
Modeline "1280x720_50" 74.25 1280 1720 1760 1980 720 725 730 750
+hsync +vsync
Modeline "1920x1080_60" 148.35 1920 2008 2052 2200 1080 1084 1089
1125 +hsync +vsync
Modeline "1920x1080_50" 148.50 1920 2448 2492 2640 1080 1084 1089
1125 +hsync +vsync
Modeline "1920x1080_24" 74.16 1920 2558 2602 2750 1080 1084 1089
1125 +hsync +vsync
Modeline "1920x1080_25" 74.25 1920 2448 2492 2640 1080 1084 1089
1125 +hsync +vsync
Modeline "1920x1080_30" 89.01 1920 2448 2492 2640 1080 1084 1089
1125 +hsync +vsync
Modeline "1024x768_75" 78.75 1024 1040 1136 1312 768 769 772 800
+hsync +vsync
Modeline "1280x1470_60" 148.5 1280 1390 1430 1650 1470 1475 1480
1500 +hsync +vsync
Modeline "1920x2205_24" 148.32 1920 2558 2602 2750 2205 2209 2214
2250 +hsync +vsync
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
Option "DynamicTwinView" "False"
Option "NoFlip" "false"
Option "NoLogo" "true"
Option "ConnectToAcpid" "0"
Option "FlatPanelProperties" "Scaling = Native"
Option "ExactModeTimingsDVI" "true"
Option "ModeValidation" "NoMaxPClkCheck,
NoEdidMaxPClkCheck, AllowNon60HzDFPModes, NoVesaModes, NoXServerModes,
NoEdidDFPMaxSizeCheck, NoDFPNativeResolutionCheck, NoPredefinedModes,
NoUserModes"
Option "HWCursor" "false"
# To put Xorg in debug mode change "false" to "true" in the line below:
Option "ModeDebug" "false"
# To use a local edid.bin file uncomment the 4 lines below (change
DFP-0 to match your card)
# Option "ConnectedMonitor" "DFP-0"
# Option "CustomEDID" "DFP-0:/storage/.config/edid.bin"
# Option "IgnoreEDID" "false"
# Option "UseEDID" "true"
EndSection
Section "Screen"
Identifier "screen"
Device "nvidia"
Monitor "Monitor0"
DefaultDepth 24
Option "ColorRange" "Full"
# Option "ColorRange" "Limited"
# Option "ColorSpace" "RGB"
# Option "ColorSpace" "YCbCr444"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "false"
EndSection
The effect is still the same (similar top/buttom) the 3D signal doesn't
exist.
What am I doing wrong?
Robert_Pliszko.vcf
Description: Vcard