Re: [Bino-list] macport qt4-mac install error

[Nate]

Log file contents:

version:1
:msg:clean --->  Computing dependencies for libass:info:clean .:debug:clean 
Searching for dependency: enca
:debug:clean Didn't find receipt, going to depspec regex for: enca
:debug:clean Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/enca

:debug:clean OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf

:info:clean .:debug:clean Searching for dependency: xz
:debug:clean Didn't find receipt, going to depspec regex for: xz
:debug:clean Changing to port directory: 
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz

:debug:clean OS darwin/10.8.0 (Mac OS X 10.6) arch i386
:debug:clean org.macports.load registered provides 'load', a pre-existing 
procedure. Target override will not be provided
:debug:clean org.macports.unload registered provides 'unload', a pre-existing 
procedure. Target override will not be provided
:debug:clean org.macports.distfiles registered provides 'distfiles', a 
pre-existing procedure. Target override will not be provided
:debug:clean adding the default universal variant
:debug:clean Reading variant descriptions from 
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf

:debug:clean Searching for dependency: libiconv
:debug:clean Found Dependency: receipt exists for libiconv
:info:clean .:debug:clean Searching for dependency: gettext
:debug:clean Found Dependency: receipt exists for gettext
:msg:clean 
:msg:clean --->  Dependencies to be installed: enca xz
:debug:clean Starting logging for xz
:debug:clean Starting logging for enca
:debug:main Executing org.macports.main (libass)
:debug:main changing euid/egid - current euid: 0 - current egid: 0
:debug:main egid changed to: 501
:debug:main euid changed to: 502
:debug:archivefetch archivefetch phase started at Tue Nov  1 11:46:10 PDT 2011
:msg:archivefetch --->  Fetching archive for libass
:debug:archivefetch Executing org.macports.archivefetch (libass)
:debug:archivefetch Can't run archivefetch on this port without elevated 
privileges. Escalating privileges back to root.
:debug:archivefetch euid changed to: 0. egid changed to: 0.
:debug:archivefetch changing euid/egid - current euid: 0 - current egid: 0
:debug:archivefetch egid changed to: 501
:debug:archivefetch euid changed to: 502
:info:archivefetch --->  libass-0.9.11_0.darwin_10.x86_64.tbz2 doesn't seem to 
exist in /opt/local/var/macports/software/libass
:msg:archivefetch --->  Attempting to fetch 
libass-0.9.11_0.darwin_10.x86_64.tbz2 from http://packages.macports.org/libass
:debug:archivefetch Fetching archive failed:: The requested URL returned error: 
404
:debug:archivefetch Privilege de-escalation not attempted as not running as 
root.
:debug:fetch fetch phase started at Tue Nov  1 11:46:10 PDT 2011
:notice:fetch --->  Fetching libass
:debug:fetch Can't run fetch on this port without elevated privileges. 
Escalating privileges back to root.
:debug:fetch euid changed to: 0. egid changed to: 0.
:debug:fetch changing euid/egid - current euid: 0 - current egid: 0
:debug:fetch egid changed to: 501
:debug:fetch euid changed to: 502
:debug:fetch Executing org.macports.fetch (libass)
:info:fetch --->  libass-0.9.11.tar.bz2 doesn't seem to exist in 
/opt/local/var/macports/distfiles/libass
:debug:fetch Pinging libass.googlecode.com...
:debug:fetch Pinging distfiles.macports.org...
:debug:fetch Pinging aarnet.au.distfiles.macports.org...
:debug:fetch Pinging her.gr.distfiles.macports.org...
:debug:fetch Pinging lil.fr.distfiles.macports.org...
:debug:fetch Pinging sea.us.distfiles.macports.org...
:debug:fetch Pinging ykf.ca.distfiles.macports.org...
:debug:fetch libass.googlecode.com ping time is 10000
:debug:fetch distfiles.macports.org ping time is 16.300
:debug:fetch aarnet.au.distfiles.macports.org ping time is 178.027
:debug:fetch her.gr.distfiles.macports.org ping time is 210.529
:debug:fetch lil.fr.distfiles.macports.org ping time is 163.632
:debug:fetch sea.us.distfiles.macports.org ping time is 10000
:debug:fetch ykf.ca.distfiles.macports.org ping time is 76.759
:notice:fetch --->  Attempting to fetch libass-0.9.11.tar.bz2 from 
http://distfiles.macports.org/libass
:debug:fetch Fetching failed:: The requested URL returned error: 404
:notice:fetch --->  Attempting to fetch libass-0.9.11.tar.bz2 from 
http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libass
:debug:fetch Fetching failed:: The requested URL returned error: 404
:notice:fetch --->  Attempting to fetch libass-0.9.11.tar.bz2 from 
http://lil.fr.distfiles.macports.org/libass
:debug:fetch Fetching failed:: The requested URL returned error: 404
:notice:fetch --->  Attempting to fetch libass-0.9.11.tar.bz2 from 
http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/libass
:debug:fetch Fetching failed:: The requested URL returned error: 404
:notice:fetch --->  Attempting to fetch libass-0.9.11.tar.bz2 from 
http://her.gr.distfiles.macports.org/mirrors/macports/mpdistfiles/libass
:debug:fetch Fetching failed:: The requested URL returned error: 404
:notice:fetch --->  Attempting to fetch libass-0.9.11.tar.bz2 from 
http://libass.googlecode.com/files/
:debug:fetch Privilege de-escalation not attempted as not running as root.
:debug:checksum checksum phase started at Tue Nov  1 11:46:23 PDT 2011
:notice:checksum --->  Verifying checksum(s) for libass
:debug:checksum Executing org.macports.checksum (libass)
:info:checksum --->  Checksumming libass-0.9.11.tar.bz2
:debug:checksum Correct (md5) checksum for libass-0.9.11.tar.bz2
:debug:checksum Correct (sha1) checksum for libass-0.9.11.tar.bz2
:debug:checksum Correct (rmd160) checksum for libass-0.9.11.tar.bz2
:debug:checksum Privilege de-escalation not attempted as not running as root.
:debug:extract extract phase started at Tue Nov  1 11:46:23 PDT 2011
:notice:extract --->  Extracting libass
:debug:extract setting option extract.cmd to /usr/bin/bzip2
:debug:extract Executing org.macports.extract (libass)
:info:extract --->  Extracting libass-0.9.11.tar.bz2
:debug:extract setting option extract.args to 
'/opt/local/var/macports/distfiles/libass/libass-0.9.11.tar.bz2'
:debug:extract Environment: CPATH='/opt/local/include' 
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' 
MACOSX_DEPLOYMENT_TARGET='10.6'
:debug:extract Assembled command: 'cd 
"/opt/local/var/macports/build/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/work"
 && /usr/bin/bzip2 -dc 
'/opt/local/var/macports/distfiles/libass/libass-0.9.11.tar.bz2' | 
/usr/bin/gnutar --no-same-owner -xf -'
:debug:extract Executing command line:  cd 
"/opt/local/var/macports/build/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/work"
 && /usr/bin/bzip2 -dc 
'/opt/local/var/macports/distfiles/libass/libass-0.9.11.tar.bz2' | 
/usr/bin/gnutar --no-same-owner -xf - 
:debug:extract euid/egid changed to: 0/0
:debug:extract chowned 
/opt/local/var/macports/build/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/work
 to macports
:debug:extract euid/egid changed to: 502/501
:debug:extract Privilege de-escalation not attempted as not running as root.
:debug:patch patch phase started at Tue Nov  1 11:46:32 PDT 2011
:debug:patch Executing org.macports.patch (libass)
:debug:patch Privilege de-escalation not attempted as not running as root.
:debug:configure configure phase started at Tue Nov  1 11:46:32 PDT 2011
:notice:configure --->  Configuring libass
:debug:configure Using compiler 'Mac OS X llvm-gcc 4.2'
:debug:configure Executing org.macports.configure (libass)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 
-arch 
x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' 
LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' 
CXX='/Developer/usr/bin/llvm-g++-4.2' 
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/work/.CC_PRINT_OPTIONS'
 F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' 
OBJC='/Developer/usr/bin/llvm-gcc-4.2' FCFLAGS='-pipe -O2 -m64' 
INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe 
-O2 -m64' CC_PRINT_OPTIONS='YES' CC='/Developer/usr/bin/llvm-gcc-4.2'
:debug:configure Assembled command: 'cd 
"/opt/local/var/macports/build/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/work/libass-0.9.11"
 && ./configure --prefix=/opt/local'
:debug:configure Executing command line:  cd 
"/opt/local/var/macports/build/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/work/libass-0.9.11"
 && ./configure --prefix=/opt/local 
:info:configure checking for a BSD-compatible install... /usr/bin/install -c
:info:configure checking whether build environment is sane... yes
:info:configure checking for a thread-safe mkdir -p... ./install-sh -c -d
:info:configure checking for gawk... no
:info:configure checking for mawk... no
:info:configure checking for nawk... no
:info:configure checking for awk... awk
:info:configure checking whether make sets $(MAKE)... yes
:info:configure checking build system type... i386-apple-darwin10.8.0
:info:configure checking host system type... i386-apple-darwin10.8.0
:info:configure checking for style of include used by make... GNU
:info:configure checking for gcc... /Developer/usr/bin/llvm-gcc-4.2
:info:configure checking whether the C compiler works... yes
:info:configure checking for C compiler default output file name... a.out
:info:configure checking for suffix of executables... 
:info:configure checking whether we are cross compiling... no
:info:configure checking for suffix of object files... o
:info:configure checking whether we are using the GNU C compiler... yes
:info:configure checking whether /Developer/usr/bin/llvm-gcc-4.2 accepts -g... 
yes
:info:configure checking for /Developer/usr/bin/llvm-gcc-4.2 option to accept 
ISO C89... none needed
:info:configure checking dependency style of /Developer/usr/bin/llvm-gcc-4.2... 
gcc3
:info:configure checking for a sed that does not truncate output... /usr/bin/sed
:info:configure checking for grep that handles long lines and -e... 
/usr/bin/grep
:info:configure checking for egrep... /usr/bin/grep -E
:info:configure checking for fgrep... /usr/bin/grep -F
:info:configure checking for ld used by /Developer/usr/bin/llvm-gcc-4.2... 
/Developer/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin10/4.2.1/ld
:info:configure checking if the linker 
(/Developer/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU 
ld... no
:info:configure checking for BSD- or MS-compatible name lister (nm)... 
/usr/bin/nm
:info:configure checking the name lister (/usr/bin/nm) interface... BSD nm
:info:configure checking whether ln -s works... yes
:info:configure checking the maximum length of command line arguments... 196608
:info:configure checking whether the shell understands some XSI constructs... 
yes
:info:configure checking whether the shell understands "+="... yes
:info:configure checking for 
/Developer/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to 
reload object files... -r
:info:configure checking for objdump... no
:info:configure checking how to recognize dependent libraries... pass_all
:info:configure checking for ar... ar
:info:configure checking for strip... strip
:info:configure checking for ranlib... ranlib
:info:configure checking command to parse /usr/bin/nm output from 
/Developer/usr/bin/llvm-gcc-4.2 object... ok
:info:configure checking for dsymutil... dsymutil
:info:configure checking for nmedit... nmedit
:info:configure checking for lipo... lipo
:info:configure checking for otool... otool
:info:configure checking for otool64... no
:info:configure checking for -single_module linker flag... yes
:info:configure checking for -exported_symbols_list linker flag... yes
:info:configure checking how to run the C preprocessor... 
/Developer/usr/bin/llvm-gcc-4.2 -E
:info:configure checking for ANSI C header files... yes
:info:configure checking for sys/types.h... yes
:info:configure checking for sys/stat.h... yes
:info:configure checking for stdlib.h... yes
:info:configure checking for string.h... yes
:info:configure checking for memory.h... yes
:info:configure checking for strings.h... yes
:info:configure checking for inttypes.h... yes
:info:configure checking for stdint.h... yes
:info:configure checking for unistd.h... yes
:info:configure checking for dlfcn.h... yes
:info:configure checking for objdir... .libs
:info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 supports -fno-rtti 
-fno-exceptions... no
:info:configure checking for /Developer/usr/bin/llvm-gcc-4.2 option to produce 
PIC... -fno-common -DPIC
:info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 PIC flag 
-fno-common 
-DPIC works... yes
:info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 static flag -static 
works... no
:info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 supports -c -o 
file.o... yes
:info:configure checking if /Developer/usr/bin/llvm-gcc-4.2 supports -c -o 
file.o... (cached) yes
:info:configure checking whether the /Developer/usr/bin/llvm-gcc-4.2 linker 
(/Developer/usr/llvm-gcc-4.2/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports 
shared libraries... yes
:info:configure checking dynamic linker characteristics... darwin10.8.0 dyld
:info:configure checking how to hardcode library paths into programs... 
immediate
:info:configure checking whether stripping libraries is possible... yes
:info:configure checking if libtool supports shared libraries... yes
:info:configure checking whether to build shared libraries... yes
:info:configure checking whether to build static libraries... yes
:info:configure checking for gcc... (cached) /Developer/usr/bin/llvm-gcc-4.2
:info:configure checking whether we are using the GNU C compiler... (cached) yes
:info:configure checking whether /Developer/usr/bin/llvm-gcc-4.2 accepts -g... 
(cached) yes
:info:configure checking for /Developer/usr/bin/llvm-gcc-4.2 option to accept 
ISO C89... (cached) none needed
:info:configure checking dependency style of /Developer/usr/bin/llvm-gcc-4.2... 
(cached) gcc3
:info:configure checking how to run the C preprocessor... 
/Developer/usr/bin/llvm-gcc-4.2 -E
:info:configure checking whether /Developer/usr/bin/llvm-gcc-4.2 and cc 
understand -c and -o together... yes
:info:configure checking for ANSI C header files... (cached) yes
:info:configure checking for stdbool.h that conforms to C99... no
:info:configure checking for _Bool... yes
:info:configure checking for inttypes.h... (cached) yes
:info:configure checking for stdint.h... (cached) yes
:info:configure checking for stdlib.h... (cached) yes
:info:configure checking for string.h... (cached) yes
:info:configure checking sys/time.h usability... yes
:info:configure checking sys/time.h presence... yes
:info:configure checking for sys/time.h... yes
:info:configure checking for unistd.h... (cached) yes
:info:configure checking iconv.h usability... yes
:info:configure checking iconv.h presence... yes
:info:configure checking for iconv.h... yes
:info:configure checking for an ANSI C-conforming const... yes
:info:configure checking for inline... inline
:info:configure checking for int64_t... yes
:info:configure checking for size_t... yes
:info:configure checking for uint32_t... yes
:info:configure checking for uint8_t... yes
:info:configure checking for mkdir... yes
:info:configure checking for strcasecmp... yes
:info:configure checking for strdup... yes
:info:configure checking for strtol... yes
:info:configure checking for library containing iconv_open... no
:info:configure checking for fabs in -lm... yes
:info:configure checking for pkg-config... /opt/local/bin/pkg-config
:info:configure checking pkg-config is at least version 0.9.0... yes
:info:configure checking for FREETYPE... configure: error: Package requirements 
(freetype2 >= 9.10.3) were not met:
:info:configure 
:info:configure No package 'freetype2' found
:info:configure 
:info:configure Consider adjusting the PKG_CONFIG_PATH environment variable if 
you
:info:configure installed software in a non-standard prefix.
:info:configure 
:info:configure Alternatively, you may set the environment variables 
FREETYPE_CFLAGS
:info:configure and FREETYPE_LIBS to avoid the need to call pkg-config.
:info:configure See the pkg-config man page for more details.
:info:configure 
:info:configure shell command " cd 
"/opt/local/var/macports/build/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/work/libass-0.9.11"
 && ./configure --prefix=/opt/local " returned error 1
:error:configure Target org.macports.configure returned: configure failure: 
shell command failed (see log for details)
:debug:configure Backtrace: configure failure: shell command failed (see log 
for 
details)
    while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for libass): 
org.macports.activate org.macports.configure org.macports.build 
org.macports.destroot org.macports.install
:notice:configure Log for libass is at: 
/opt/local/var/macports/logs/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/main.log

nate-gallaghers-macbook-pro:bino-1.2.1-portfiles-20111029 ibook$ 



----- Original Message ----
> From: Nate <address@hidden>
> To: Frédéric Devernay <address@hidden>; bino list 
><address@hidden>
> Sent: Tue, November 1, 2011 11:54:07 AM
> Subject: Re: [Bino-list] macport qt4-mac install error
> 
> Hi Fred,
> 
> Your website instructions almost worked
> Got an error when it  got to libass:
> 
> --->  Extracting libass
> --->   Configuring libass
> Error: Target org.macports.configure returned: configure  failure: shell 
>command 
>
> failed (see log for details)
> Log for libass is at: 
>/opt/local/var/macports/logs/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/main.log
>g
> 
> Error:  Status 1 encountered during processing.
> To report a bug, see  <http://guide.macports.org/#project.tickets>
> 
> 
> 
> Full port  install readout  below:
> 
> 
> nate-gallaghers-macbook-pro:bino-1.2.1-portfiles-20111029  ibook$ portindex
> Creating port index in 
> /projects/Kid_Infinity/portfiles/bino-1.2.1-portfiles-20111029
> Adding  port audio/openal-soft
> Adding port multimedia/bino
> Adding port  multimedia/ffmpeg
> Adding port multimedia/libass
> 
> Total number of ports  parsed:4 
> Ports successfully parsed:4 
> Ports failed:0 
> Up-to-date ports  skipped:0
> 
> nate-gallaghers-macbook-pro:bino-1.2.1-portfiles-20111029  ibook$  pwd
> /projects/Kid_Infinity/portfiles/bino-1.2.1-portfiles-20111029
> nate-gallaghers-macbook-pro:bino-1.2.1-portfiles-20111029  ibook$ sudo port 
> install x264 +asm ffmpeg +no_nonfree libass openal-soft  bino +app 
> +openalsoft 

> +qt4nokia
> Password:
> --->  Cleaning  x264
> --->  Computing dependencies for ffmpeg
> could not read 
>"/projects/Kid_Infinity/portfiles/bino-1.2.1-portfiles-20111029/multimedia/ffmpeg/Portfile":
>:
>   permission denied
> Log for ffmpeg is at: 
>/opt/local/var/macports/logs/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_ffmpeg/ffmpeg/main.log
>g
> 
> Error:  Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
> nate-gallaghers-macbook-pro:bino-1.2.1-portfiles-20111029  ibook$ sudo port 
> install x264 +asm ffmpeg +no_nonfree libass openal-soft  bino +app 
> +openalsoft 

> +qt4nokia
> --->  Cleaning  x264
> --->  Computing dependencies for ffmpeg
> --->   Fetching archive for ffmpeg
> --->  Attempting to fetch  ffmpeg-0.8.5_1+no_nonfree.darwin_10.x86_64.tbz2 
> from 
>
> http://packages.macports.org/ffmpeg
> --->  Fetching  ffmpeg
> --->  Attempting to fetch ffmpeg-0.8.5.tar.bz2 from 
> http://distfiles.macports.org/ffmpeg
> --->  Attempting to fetch  ffmpeg-0.8.5.tar.bz2 from 
> http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/ffmpeg
> --->   Attempting to fetch ffmpeg-0.8.5.tar.bz2 from 
> http://lil.fr.distfiles.macports.org/ffmpeg
> --->  Attempting to  fetch ffmpeg-0.8.5.tar.bz2 from 
> http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/ffmpeg
> --->   Attempting to fetch ffmpeg-0.8.5.tar.bz2 from 
> http://www.ffmpeg.org/releases/
> --->  Verifying checksum(s) for  ffmpeg
> --->  Extracting ffmpeg
> --->  Configuring  ffmpeg
> --->  Building ffmpeg
> --->  Staging ffmpeg into  destroot
> --->  Installing ffmpeg @0.8.5_1+no_nonfree
> --->   Deactivating ffmpeg @0.7.6_0
> --->  Cleaning ffmpeg
> --->   Activating ffmpeg @0.8.5_1+no_nonfree
> 
> *******
> ******* This build of  ffmpeg includes GPLed code and
> ******* is therefore licensed under GPL v2 or  later.
> *******
> ******* The following modules are  GPLed:
> *******
> *******      postproc
> *******       libx264
> *******       libxvid
> *******
> ******* To include only LGPLed code use variant +no_gpl  +no_nonfree
> *******
> 
> --->  Cleaning ffmpeg
> --->   Computing dependencies for libass
> --->  Dependencies to be installed:  enca xz
> --->  Fetching archive for xz
> --->  Attempting to  fetch xz-5.0.3_0.darwin_10.x86_64.tbz2 from 
> http://packages.macports.org/xz
> --->  Attempting to fetch  xz-5.0.3_0.darwin_10.x86_64.tbz2.rmd160 from 
> http://packages.macports.org/xz
> --->  Installing xz  @5.0.3_0
> --->  Activating xz @5.0.3_0
> --->  Cleaning  xz
> --->  Fetching archive for enca
> --->  Attempting to  fetch enca-1.13_0.darwin_10.x86_64.tbz2 from 
> http://packages.macports.org/enca
> --->  Attempting to fetch  enca-1.13_0.darwin_10.x86_64.tbz2.rmd160 from 
> http://packages.macports.org/enca
> --->  Installing enca  @1.13_0
> --->  Activating enca @1.13_0
> --->  Cleaning  enca
> --->  Fetching archive for libass
> --->  Attempting to  fetch libass-0.9.11_0.darwin_10.x86_64.tbz2 from 
> http://packages.macports.org/libass
> --->  Fetching  libass
> --->  Attempting to fetch libass-0.9.11.tar.bz2 from 
> http://distfiles.macports.org/libass
> --->  Attempting to fetch  libass-0.9.11.tar.bz2 from 
> http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/libass
> --->   Attempting to fetch libass-0.9.11.tar.bz2 from 
> http://lil.fr.distfiles.macports.org/libass
> --->  Attempting to  fetch libass-0.9.11.tar.bz2 from 
> http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/libass
> --->   Attempting to fetch libass-0.9.11.tar.bz2 from 
> http://her.gr.distfiles.macports.org/mirrors/macports/mpdistfiles/libass
> --->   Attempting to fetch libass-0.9.11.tar.bz2 from 
> http://libass.googlecode.com/files/
> --->  Verifying checksum(s)  for libass
> --->  Extracting libass
> --->  Configuring  libass
> Error: Target org.macports.configure returned: configure failure:  shell 
>command 
>
> failed (see log for details)
> Log for libass is at: 
>/opt/local/var/macports/logs/_projects_Kid_Infinity_portfiles_bino-1.2.1-portfiles-20111029_multimedia_libass/libass/main.log
>g
> 
> Error:  Status 1 encountered during processing.
> To report a bug, see <http://guide.macports.org/#project.tickets>
> 
> 
> 
> 
> 
> -----  Original Message ----
> > From: Frédéric Devernay <address@hidden>
> >  To: Nate <address@hidden>
> >  Sent: Mon, October 31, 2011 12:07:58 PM
> > Subject: Re: [Bino-list] macport  qt4-mac install error
> > 
> > qtnoia must be installed  separatey.
> > To compile from your source, either  change the git path  and git commit id 
>(if 
>
> >you made a local git for it) at the  end of  the Portfile,
> > OR
> > use the magic configure command:
> >  ./configure  --prefix=/opt/local LDFLAGS=-L/opt/local/lib 
> >CPPFLAGS=-I/opt/local/include  libqtopengl_LIBS="-framework QtCore  
> >-framework 
>
> >QtGui -framework QtOpenGL  -framework OpenGL"  
> >libqtopengl_CFLAGS="-I/Library/Frameworks/QtCore.framework/Headers  
> >-I/Library/Frameworks/QtGui.framework/Headers  
> >-I/Library/Frameworks/QtOpenGL.framework/Header"
> > 
> > I'll  add it to the web  page
> > 
> > fred
> > 
> > Le 31 oct.  2011 à 19:04, Nate a écrit :
> > 
> > >  Thank you. I will try  this today.
> > > I want to be able to compile the  changes I make  to the bino source.
> > > Is it possible to install qtnokia  without  the bino port?
> > > Thanks,
> > > Nate
> > > 
> > > 
> > >  ----- Original Message ----
> > >> From: Frédéric  Devernay <address@hidden>
> >  >>  To: Nate <address@hidden>
> >  >>  Sent: Mon, October 31, 2011 10:53:23 AM
> > >> Subject:  Re: [Bino-list]  macport qt4-mac install error
> > >> 
> >  >> just updated the  instructions on the web page:
> > >> http://devernay.free.fr/hacks/bino/
> > >> 
> > >> Le  29 oct.  2011 à 23:00, Nate a  écrit :
> > >> 
> >  >>> openal-soft and  bino also not found
> > >>> 
> > >>> 
> > >>> 
> > >>> ----- Original  Message ----
> > >>>> From: Nate  <address@hidden>
> >  >>>>  To: Frédéric Devernay <address@hidden>; 
>address@hidden
> >  >>>>  Sent:  Sat, October 29, 2011 1:58:31 PM
> >  >>>> Subject: Re:  [Bino-list] macport  qt4-mac install  error
> > >>>> 
> > >>>> Hi Fred,
> >  >>>> 
> > >>>> I used  the command you have  listed on that website.
> > >>>> sudo port    install  x264 +asm ffmpeg +no_nonfree libass openal-soft 
>bino 
>
> 
> > >> +app 
> > >> 
> > >>>> +openalsoft +qt4nokia
> >  >>>> 
> > >>>> It returned with:
> >  >>>> 
> > >>>>  Error: Port libass not   found
> > >>>> 
> > >>>> 
> >  >>>> 
> > >>>> ----- Original Message   ----
> > >>>>> From:  Frédéric Devernay  <address@hidden>
> >  >>>>>  To: address@hidden
> >  >>>>>  Sent: Sat,  October 29, 2011 4:32:29 AM
> >  >>>>> Subject:  Re:  [Bino-list] macport qt4-mac   install  error
> > >>>>> 
> >  >>>>>  Hi,
> > >>>>> 
> >  >>>>> I usually don't install  the  qt4-mac   package from MacPorts, but 
>prefer  
>
> >
> > >> the 
> >  >> 
> > >>>> QT4 
> > >>>> 
> >  >>>>> binary  distribution from Nokia, which is more   compact  (and has 
> > the 
>
> >same  
> >
> > > 
> >  >>>>>  license).
> > >>>>> 
> >  >>>>> I just put all the  Portfiles I use to build   Bino, as well  as  
> > the 

> > >>  variants I 
> >  >> 
> > >>>> 
> > >>>>> use for   the various  libraries, on  my web page:
> > >>>>> http://devernay.free.fr/hacks/bino/
> > >>>>> 
> >  >>>>> Fred
> > >>>>> 
> >  >>>>>  Le 28 oct. 2011 à  20:50, Nate a  écrit  :
> > >>>>> 
> > >>>>>> $ sudo  port  -v install  qt4-mac   +universal
> >  >>>>>> --->  Computing    dependencies for  qt4-mac
> > >>>>>> --->   Building    qt4-mac
> > >>>>>> make: Entering directory 
> >  >>>>>> 
> > >>>>> 
> > >>  
>>`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_aqua_qt4-mac/qt4-mac/work/qt-everywhere-opensource-src-4.7.4'
>'
> >
> >  >> 
> > >>>> '
> > >>>>> 
> >  >>>>>> 
> > >>>>>> 
> >  >>>>>>  ....
> > >>>>>> 
> >  >>>>>> make[2]:   Leaving directory 
> >  >>>>>> 
> > >>>>> 
> > >>  
>>`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_aqua_qt4-mac/qt4-mac/work/qt-everywhere-opensource-src-4.7.4/src/3rdparty/webkit/WebCore'
>'
> >
> >  >> 
> > >>>> '
> > >>>>> 
> >  >>>>>> 
> > >>>>>> ld: in   .obj/debug-shared/PluginDataQt.o,  truncated fat file.  
>Slice  
>
> >from 
> >
> > >> 
> > >>>>>   770048 
> > >>>>> 
> > >>>>>> to  1511084 is  past  end of  file with length 769512 for   
>architecture  
>
> 
> > >> i386
> > >>>>>>  collect2: ld  returned 1  exit  status
> >  >>>>>> lipo:  can't open input  file:    /var/tmp//ccLtKIMA.out (No such 
>file 
>
> >or  
> >
> >  >>>>> directory)
> > >>>>>> make[2]:   ***  [../../../../lib/libQtWebKit_debug.4.7.4.dylib]  
>Error     
>
> >1
> > >>>>>> make[2]: Leaving directory 
> > >>>>>> 
> > >>>>> 
> >  >>  
>>`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_aqua_qt4-mac/qt4-mac/work/qt-everywhere-opensource-src-4.7.4/src/3rdparty/webkit/WebCore'
>'
> >
> >  >> 
> > >>>> '
> > >>>>> 
> >  >>>>>> 
> > >>>>>> make[1]: ***   [debug-all] Error  2
> > >>>>>> make[1]:   Leaving directory 
> > >>>>>> 
> >  >>>>> 
> > >>  
>>`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_aqua_qt4-mac/qt4-mac/work/qt-everywhere-opensource-src-4.7.4/src/3rdparty/webkit/WebCore'
>'
> >
> >  >> 
> > >>>> '
> > >>>>> 
> >  >>>>>> 
> > >>>>>> make: ***   [sub-webkit-all-ordered] Error  2
> > >>>>>> make:  Leaving   directory 
> > >>>>>> 
> >  >>>>> 
> > >>  
>>`/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_aqua_qt4-mac/qt4-mac/work/qt-everywhere-opensource-src-4.7.4'
>'
> >
> >  >> 
> > >>>> '
> > >>>>> 
> >  >>>>>> 
> > >>>>>> shell command " cd 
> > >>>>>> 
> > >>>>> 
> >  >>  
>>"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_aqua_qt4-mac/qt4-mac/work/qt-everywhere-opensource-src-4.7.4"
>"
> >
> >  >> 
> > >>>> "
> > >>>>> 
> >  >>>>>>  && /usr/bin/make -j2 -w all "   returned error  2
> > >>>>>> Error: Target   org.macports.build   returned: shell command failed 
>(see 
>
> 
> >  >> log  
> > >> 
> > >>>> for 
> >  >>>> 
> > >>>>> 
> > >>>>>>  details)
> > >>>>>> Warning:  the   following  items did not execute (for qt4-mac): 
> >  >>>>>> org.macports.activate  org.macports.build   org.macports.destroot 
> > >>>>>>   org.macports.install
> > >>>>>> Log for  qt4-mac is  at: 
> > >>>>>> 
> > >>>>> 
> >  >>  
>>/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_aqua_qt4-mac/qt4-mac/main.log
>g
> >
> >  >> 
> > >>>> g
> > >>>>> 
> >  >>>>>> 
> > >>>>>> Error: Status 1   encountered during  processing.
> > >>>>>> To report  a  bug,  see    
><http://guide.macports.org/#project.tickets>
> >  >>>>>> 
> > >>>>>> 
> >  >>>>> 
> > >>>>> 
> > >>>>> 
> > >>>> 
> > >>>> 
> > >> 
> >  >> 
> > 
> >
> 
>