Re: [avrdude-dev] Lengthy delay before AVR ISP MkII responds

[Rick Mann]

> On Jul 14, 2016, at 18:30 , Didrik Madheden <address@hidden> wrote:
> 
> What does avrdude output if you give it -v -v flags? (double verbose)

http://pastebin.com/vnhReS8U

The long delay occurs between these two lines:

         Using Programmer              : avrisp2
avrdude: usbdev_open(): Found AVRISP mkII, serno: 000200056408


> On 15 July 2016 at 03:27, Rick Mann <address@hidden> wrote:
>> There's a several second delay between:
>> 
>>> firmware2/ 18:22$ make flash
>>> /usr/local/bin/avr-objcopy -j .text -j .data -O ihex dress.elf dress.hex
>>> /usr/local/bin/avrdude -p m1281 -e -U flash:w:dress.hex
>> 
>> and
>> 
>>> avrdude: AVR device initialized and ready to accept instructions
>> 
>> After that, flashing is very quick. I feel like I've experienced this 
>> before, but don't recall how I fixed it. I don't recall having it even a 
>> couple days ago.
>> 
>> --
>> Rick Mann
>> address@hidden
>> 
>> 
>> 
>> _______________________________________________
>> avrdude-dev mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/avrdude-dev
> 
> 
> 
> -- 
> /Didrik
> 
> _______________________________________________
> avrdude-dev mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/avrdude-dev


-- 
Rick Mann
address@hidden