Re: [avrdude-dev] Status of ATmega164A support?

[René Liebscher]

You could try to use the config file from "bug #30498 Add support for
new avr devices (atmega324pa)" (https://savannah.nongnu.org/bugs/?30498).

If you use a svn build avrdude you can just add "-C
+atmegaXX4_corrected.conf" to your command line (otherwise you have to
copy this file into the avrdude.conf).

Kind regards

René Liebscher


Am 29.01.2012 01:55, schrieb Windell H. Oskay:
> I have ATmega164A devices that I'd like to program. 
>
> According to the online manual (and I'm not sure if this one is up to date or 
> not), both the ATmega164 and ATmega164P are supported, as 
> m164 and m164p, respectively:
> http://www.nongnu.org/avrdude/user-manual/avrdude_4.html#Option-Descriptions
>
> Typically for "A" devices, we use the "A-less" partno, which would suggest 
> that we'd pick the "m164" for our partno.  But from what I can tell, there 
> isn't actually any support for the m164 (or m164a) in avrdude, even at SVN.   
>
> Am I missing this somewhere, or should I just go ahead and edit avrdude.conf?
>
> Thanks!
> -Windell
> _______________________________________________
> avrdude-dev mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/avrdude-dev