[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] xmega status
From: |
Bob Paddock |
Subject: |
Re: [avrdude-dev] xmega status |
Date: |
Tue, 6 Oct 2009 19:24:27 -0400 |
> One other known limitation is that the target is not reset
> after programming finishes (so, eg. it starts to execute the newly downloaded
> code
>only after a manual reset).
> (This works in AVRStudio in Windows.)
I found with my XMega project that in Studio it did work with 4.16, but when
I upgraded to 4.17, now I have to cycle power. Something changed
between Studio versions in regards to reset handling, at least on the XMega.
>As far as avrdude PDI support is concerned, however, this is not relevant.
>The real question is if the protocol between the host machine (Mac or PC,
>serial or >USB) and the programming
Would it be possible to get PDI to work with other interfaces like the
(Pony)-STK200?
That removes most of the problems with undocumented Atmel protocols.
--
http://www.wearablesmartsensors.com/
http://www.softwaresafety.net/
http://www.designer-iii.com/
http://www.unusualresearch.com/