Re: [avrdude-dev] JTAGICE MKII very slow under Ubuntu Linux 9.04

[Markus Schulz]

Is this slow speed normal with avrdude?

Markus


> I just want to give a little update so you can concentrate on the real
> issues, the slow programming.
> 
> With the new 5.8 version it is now 95s, but on windows it is still only
> ~5s... any idea why so slow? By the way I tried to connect the reset to
> ground, but this doesn't make it faster.
> 
> By reading through this mailing list I was able to compile 5.8 version
> now, looks like I was missing flex package as well... so I did a:
> sudo apt-get install flex byacc bison
> 
> If I don't use the -D I still get this error
> (RSP_ILLEGAL_EMULATOR_MODE)? I guess I also had this in 5.6, but without
> displaying the message. Because I was never able to use the program
> without -D... should this work?
> 
> Regards,
> Markus
> 
> PS: sorry for the double post...
> 
> address@hidden:~/avr/HIDKeys.2007-03-29_change$ make flash
> avrdude -s -U HIDKeys.hex -c jtag2isp -p 2313 -P usb -D
> 
> avrdude: AVR device initialized and ready to accept instructions
> 
> Reading | ################################################## | 100% 0.15s
> 
> avrdude: Device signature = 0x1e9101
> avrdude: current erase-rewrite cycle count is 2147483647 (if being tracked)
> avrdude: reading input file "HIDKeys.hex"
> avrdude: input file HIDKeys.hex auto detected as Intel Hex
> avrdude: writing flash (1866 bytes):
> 
> Writing | ################################################## | 100% 95.22s
> 
> avrdude: 1866 bytes of flash written
> avrdude: verifying flash memory against HIDKeys.hex:
> avrdude: load data flash data from input file HIDKeys.hex:
> avrdude: input file HIDKeys.hex auto detected as Intel Hex
> avrdude: input file HIDKeys.hex contains 1866 bytes
> avrdude: reading on-chip flash data:
> 
> Reading | ################################################## | 100% 95.21s
> 
> avrdude: verifying ...
> avrdude: 1866 bytes of flash verified
> avrdude: jtagmkII_close(): bad response to GO command:
> RSP_ILLEGAL_EMULATOR_MODE
> 
> avrdude done.  Thank you.
> 
> 
>> Here is my console output
>>
>> address@hidden:~/avr/HIDKeys.2007-03-29_change$ avrdude -U HIDKeys.hex -c
>> jtag2isp -p 2313 -P usb -D
>>
>> avrdude: AVR device initialized and ready to accept instructions
>>
>> Reading | ################################################## | 100% 0.15s
>>
>> avrdude: Device signature = 0x1e9101
>> avrdude: current erase-rewrite cycle count is 2147483647 (if being tracked)
>> avrdude: reading input file "HIDKeys.hex"
>> avrdude: input file HIDKeys.hex auto detected as Intel Hex
>> avrdude: writing flash (1866 bytes):
>>
>> Writing | ################################################## | 100% 284.16s
>>
>> avrdude: 1866 bytes of flash written
>> avrdude: verifying flash memory against HIDKeys.hex:
>> avrdude: load data flash data from input file HIDKeys.hex:
>> avrdude: input file HIDKeys.hex auto detected as Intel Hex
>> avrdude: input file HIDKeys.hex contains 1866 bytes
>> avrdude: reading on-chip flash data:
>>
>> Reading | ################################################## | 100% 95.08s
>>
>> avrdude: verifying ...
>> avrdude: 1866 bytes of flash verified
>>
>> avrdude done.  Thank you.
> 
> 
> _______________________________________________
> avrdude-dev mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/avrdude-dev
>