[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bug #26007] ATTiny167 not supported
From: |
Joerg Wunsch |
Subject: |
[avrdude-dev] [bug #26007] ATTiny167 not supported |
Date: |
Thu, 02 Apr 2009 08:16:05 +0000 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.8.1.19) Gecko/20081217 SeaMonkey/1.1.14 |
Follow-up Comment #3, bug #26007 (project avrdude):
You can ignore the STK500 and AVR910 devcodes. (STK500 here
relates to the old STK500 version 1 firmware only.)
For the EEPROM parameters, just copy them over from a similar
device for a first try. The delay is documented in the
datasheet (4.0 ms). There is no readback algorithm, so just
fill in 0xff (as probably most other devices are doing).
The serial instructions are given in the datasheet, but you
can safely copy them from any other AVR with the same EEPROM
size. The mode/delay/blocksize/readsize parameters are the
STK500v2 parameters from the XML file.
Just give it a try! You won't kill your AVR if something is
wrong, but if you never try, you'll never succeed.
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?26007>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/