[avrdude-dev] [bug #20950] Error while writing to an ATMega8 with avr910 programmer

[anonymous]

URL:
  <http://savannah.nongnu.org/bugs/?20950>

                 Summary: Error while writing to an ATMega8 with avr910
programmer
                 Project: AVR Downloader/UploaDEr
            Submitted by: None
            Submitted on: Samstag 01.09.2007 um 10:44 UTC
                Category: None
                Severity: 3 - Normal
                Priority: 5 - Normal
              Item Group: None
                  Status: None
                 Privacy: Public
             Assigned to: None
         Originator Name: Georg Richter
        Originator Email: address@hidden
             Open/Closed: Open
         Discussion Lock: Any

    _______________________________________________________

Details:

I'm using WinAVR 20070525 and AVRdude 5.3.1 (at least I do think so).

While trying to write a program to an ATMega8 via the avr910 programmer
occurs an error: "Programmer doesn't support device", it says. But it does -
I've found the error's source. In the avrdude.conf on line 5298 for the
ATMega8 is written "avr910_devcode   = 0x77;", but the adress must be "0x76".
77 is only for the avr109 programmer (says google^^). If you correct this
value it will work out without any problems.
no dramatic bug, just a little error - would be great if you may correct it
with the next avrdude and WinAVR versions!

PS: Sorry for my bad english, I'm just a german pupil.




    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?20950>

_______________________________________________
  Nachricht geschickt von/durch Savannah
  http://savannah.nongnu.org/