avrdude-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avrdude-dev] Adding elapsed time


From: Brian Dean
Subject: Re: [avrdude-dev] Adding elapsed time
Date: Tue, 29 Jul 2003 20:20:16 -0400
User-agent: Mutt/1.4.1i

On Tue, Jul 29, 2003 at 03:17:07PM -0700, Theodore A. Roth wrote:

> This should be trivial to add with the new report_progress now in place. I 
> will have to leave this for someone else to implement though since I need to 
> get back to gdb stuff.

How about the following patch (attached)?  Here's the output:

----------------------------------------------------------------------
address@hidden:/avrdude- ./avrdude -p m128 -e -i 
~/src/cvs/avr/m128b/diag/diag.hex 

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.03s

avrdude: Device signature = 0x1e9702
avrdude: erasing chip
avrdude: done.
avrdude: reading input file "/home/bsd/src/cvs/avr/m128b/diag/diag.hex"
avrdude: input file /home/bsd/src/cvs/avr/m128b/diag/diag.hex auto detected as 
Intel Hex
avrdude: writing flash (19278 bytes):

Writing | ################################################## | 100% 7.60s

avrdude: 19456 bytes of flash written
avrdude: verifying flash memory against 
/home/bsd/src/cvs/avr/m128b/diag/diag.hex:
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 6.84s

avrdude: verifying ...
avrdude: 19456 bytes of flash verified

avrdude done.  Thank you.
----------------------------------------------------------------------

The time updates continuously with the percentage, except for the case
of '_no_tty()', when it is displayed at the very end.

I'm using 'gettimeofday()' to get the current time.  Hopefully that
works with Windows.

Cheers,
-Brian
-- 
Brian Dean
address@hidden
http://www.bsdhome.com/
http://www.bdmicro.com/




reply via email to

[Prev in Thread] Current Thread [Next in Thread]