avrdude-dev
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avrdude-dev] stk500 and firmware 1.14


From: Brian Dean
Subject: Re: [avrdude-dev] stk500 and firmware 1.14
Date: Thu, 20 Feb 2003 12:43:54 -0500
User-agent: Mutt/1.4i

On Thu, Feb 20, 2003 at 09:39:20AM -0800, Theodore A. Roth wrote:

> My interpretation is that the psuedo mode is for the 8-pin avrs which
> don't have enough pins for full parallel programming, thus they use a
> hiv serial programming (not to be confused with spi ISP).

So perhaps for the config file we could have:

        serial   = yes | no;
        parallel = yes | no | pseudo;

Defaults for both would be "yes" unless specified otherwise?

That should provide enough information to fill out the "set device"
parameters required by the stk500.

Other suggestions?

-Brian
-- 
Brian Dean                                      address@hidden




reply via email to

[Prev in Thread] Current Thread [Next in Thread]