[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Compatibility of GCC with ATMEGA128RFA1
|
From: |
Colin O'Flynn |
|
Subject: |
Re: [avr-gcc-list] Compatibility of GCC with ATMEGA128RFA1 |
|
Date: |
Tue, 15 Jan 2013 16:44:16 -0400 |
I've been compiling for it with WinAVR & GCC on Linux for years, so I'd say
it works ok provided you've built your tools correctly (or use precompiled).
-Colin
-----Original Message-----
From: address@hidden
[mailto:address@hidden On Behalf Of
Weddington, Eric
Sent: January-13-13 12:44 AM
To: Jason; address@hidden
Subject: Re: [avr-gcc-list] Compatibility of GCC with ATMEGA128RFA1
Hi Jason,
Yes, we're familiar with the ATmega128RFA1. IIRC, patches are available.
Have you checked to see if it's supported in the Atmel Toolchain?
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden On
> Behalf Of Jason
> Sent: Saturday, January 12, 2013 9:11 PM
> To: address@hidden
> Subject: [avr-gcc-list] Compatibility of GCC with ATMEGA128RFA1
>
> Hi,
>
> I am interested in using the ATmega128rfa1 with the AVR-GCC toolchain.
> Is this chip supported?
>
> ATmega128rfa1 Datasheet: http://www.atmel.com/Images/doc8266.pdf
>
> Some background:
>
> The ATmega128RFA1 is a low-power CMOS 8-bit microcontroller based on
> the AVR enhanced RISC architecture combined with a high data rate
> transceiver for the 2.4 GHz ISM band. It is derived from the
> ATmega1281 microcontroller and the
> AT86RF231 radio
> transceiver.
>
> Regards,
> Jason
>
> E: address@hidden
>
> _______________________________________________
> AVR-GCC-list mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/avr-gcc-list
_______________________________________________
AVR-GCC-list mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/avr-gcc-list