[avr-gcc-list] Code Size Causes Crash?

[Kevin Neff]

I am writing code for the ATMEGA128.  After my program reached a certain
size it crashes/resets in the middle of the program.  If I increase
the size of the program further, even if that code won't be executed,
the MCU crashes very early in the program and hangs.

While investigating this problem, I made a simple program to test code
size (which is included below).  I've incremented and deincremented 'i'
many times to increase the code size.  with 404 increment and decrement
statements, the code is run correctly (the LED blinks).  The addition
of one statement beyond that breaks the program.

It's interesting that the critical size of this program is much smaller
than my application, which did not exhibit code size sensative behavior
until it was 6.5 kB.  My test program stopped working at 4.3 kB.

Any ideas about what could cause this problem?

--Kevin Neff





Here is the avr-size output, both the working (smaller) program and the
broken (larger) program.

  avr-objcopy --strip-all -O ihex main.elf main.hex
     text    data     bss     dec     hex filename
     4312       0       0    4312    10d8 main.elfa

  avr-gcc -mmcu=atmega128 -Wl,-Map=main.map,--cref main.o -o main.elf
  avr-objcopy --strip-all -O ihex main.elf main.hex
     text    data     bss     dec     hex filename
     4322       0       0    4322    10e2 main.elf


Here's the difference between the avr-nm outputs.

  # diff main_nm_fixed main_nm_broken
  56,58c56,58
  < 000010d8 A __data_load_end
  < 000010d8 A __data_load_start
  < 000010d8 T _etext
  ---
  > 000010e2 A __data_load_end
  > 000010e2 A __data_load_start
  > 000010e2 T _etext


Here is the difference between the map files.

  # diff main_fixed.map main_broken.map
  4c4
  <                               main_fixed.o (__do_clear_bss)
  ---
  >                               main_broken.o (__do_clear_bss)
  18c18
  < LOAD main_fixed.o
  ---
  > LOAD main_broken.o
  113c113
  < .text           0x00000000     0x10d8
  ---
  > .text           0x00000000     0x10e2
  180c180
  <  .text          0x000000ca     0x100e main_fixed.o
  ---
  >  .text          0x000000ca     0x1018 main_broken.o
  182c182
  <                 0x000010d8                . = ALIGN (0x2)
  ---
  >                 0x000010e2                . = ALIGN (0x2)
  ---
  >                 0x000010e2                . = ALIGN (0x2)
  184c184
  <                 0x000010d8                . = ALIGN (0x2)
  ---
  >                 0x000010e2                . = ALIGN (0x2)
  195c195
  <                 0x000010d8                _etext = .
  ---
  >                 0x000010e2                _etext = .
  197c197
  < .data           0x00800100        0x0 load address 0x000010d8
  ---
  > .data           0x00800100        0x0 load address 0x000010e2
  210,211c210,211
  <                 0x000010d8                __data_load_start = LOADADDR 
(.data)<                 0x000010d8                __data_load_end = 
(__data_load_start + SIZEOF (.data))
  ---
  >                 0x000010e2                __data_load_start = LOADADDR 
(.data)>                 0x000010e2                __data_load_end = 
(__data_load_start + SIZEOF (.data))
  220c220
  < .eeprom         0x00810000        0x0 load address 0x000010d8
  ---
  > .eeprom         0x00810000        0x0 load address 0x000010e2
  287c287
  < OUTPUT(main_fixed.elf elf32-avr)
  ---
  > OUTPUT(main_broken.elf elf32-avr)
  299c299
  <                                                   main_fixed.o
  ---
  >                                                   main_broken.o
  301c301
  <                                                   main_fixed.o
  ---
  >                                                   main_broken.o
  305c305
  <                                                   main_fixed.o
  ---
  >                                                   main_broken.o
  342c342
  < main                                              main_fixed.o
  ---
  > main                                              main_broken.o


Here is the listing of the test program.

  #define __AVR_ATmega128__
  #include <avr/io.h>
  #include "../../bit_patterns.h"  // B0 = 0x01, b0 = ~B0

  int main()
  {
    int i = 0;
    int status = 0;

    DDRF = B0;  // LED on this port
                                                                                
    while( 1 )
    {
      // toggle LED
      if(  status == 0  )
      {
        PORTF = B0;
        status = 1;
      }
      else
      {
        PORTF = 0;
        status = 0;
      }
                                                                                
      i = 0;
      
      i += 1;  // line 30
      i -= 1;  // line 31 
  
      ...
  
      i += 1;  // line 434
  
      // this line must be commented out for the program to run properly
      i -= 1;  // line 435
  
    }
    return 1;
  }