[avr-gcc-list] boot vector address for ATMega32 in datasheet correct ?

[Ewout Boks]

Hello all,

I converted the AVR230 DES bootloader application to be used with GCC 
and want to load it into my target, an ATMega32. I need to know (of 
course) what location I should feed into the linker script to place the 
bootloader.

In the datasheet , the application flash is said to end at 0x37ff and 
the reset vector is said to start at 0x3800 with BOOTZ set to 0 0 .

I do not understand this, as the ATMega32 has 32K of flash and address 
0x37ff is exactly at 16K, ie halfway the application flash of the ATMega32.

I would expect the bootloader section to start at something like 0x7800 .

Could someone please shed some light on this ?

Thanks,

Ewout Boks