[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] UISP erased mega128 id bytes
From: |
Iztok Zupet |
Subject: |
Re: [avr-gcc-list] UISP erased mega128 id bytes |
Date: |
Sun, 21 Jul 2002 10:37:19 +0200 |
User-agent: |
KMail/1.4.1 |
On Saturday 20 July 2002 23:37, Theodore A. Roth wrote:
> Have you tried using the latest cvs version?
>
> A few weeks ago I added code to enable reading/writing fuses as command
> line options. Thus, you don't need to use a fuse section. I've had no
> problems altering the fuses on a m128 using the stk500/501. I haven't
> tried with dapa yet. I forget, does the skt200 use dapa? If so, I could
> try it out with that if need be.
>
> Ted Roth
>
> On Sat, 20 Jul 2002, Iztok Zupet wrote:
> >The chips were sold to us as normal parts. Series is 0220.
> >
> >Seems that the chip ID is not locked, since it can be written back with
> > entire fuse section. But the erase function erases tham again.
> >
> >The fuse section i use is:
> >
> >S00700006675736545
> >S10800002FC1AEFFFF5B
> >S5030001FB
> >S9030000FC
> >
> >Regards
> >iz
> >avr-gcc-list at http://avr1.org
>
> avr-gcc-list at http://avr1.org
I don't use an STK, i use just the dapa mode or PAVR. That was already a
production board.
Anyhow, I'll update UISP to the latest CVS.
Regards
iz
avr-gcc-list at http://avr1.org