Re: [avr-chat] could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc

[Joerg Wunsch]

dmitry chernov <address@hidden> wrote:

> Hi people! I get this error when I am trying to flash my usbasp
> device. But my device has pid 0x5df and vid the same 0x16c0. Where
> avrdude gets vid and pid? How to change them to proper ones?

The following identifiers are hardcoded in AVRDUDE's usbasp.h:

/* USB identifiers */
#define USBASP_SHARED_VID   0x16C0  /* VOTI */
#define USBASP_SHARED_PID   0x05DC  /* Obdev's free shared PID */

#define USBASP_OLD_VID      0x03EB  /* ATMEL */
#define USBASP_OLD_PID      0xC7B4  /* (unoffical) USBasp */

#define USBASP_NIBOBEE_VID  0x16C0  /* VOTI */
#define USBASP_NIBOBEE_PID  0x092F  /* NIBObee PID */

As the code has been contributed by Thomas Fischl himself, you
might want to contact him on this.

Of course, if you just change your personal version, you could
at least get it going for now.
-- 
cheers, J"org               .-.-.   --... ...--   -.. .  DL8DTL

http://www.sax.de/~joerg/                        NIC: JW11-RIPE
Never trust an operating system you don't have sources for. ;-)